dxdesigner 画原理图出错
我用dxdesigner 画原理图,加总线之后出现如下错误。
viewbase: Error 234: Error - The WIR file for CPU.1 has error(s), correct and recheck the schematic:
viewbase: Note 236: - Net and/or Bus has 2 names -- D1 and D5.
viewbase: Note 236: - Net and/or Bus has 2 names -- D1 and D10.
viewbase: Note 236: - Net and/or Bus has 2 names -- D1 and D15.
viewbase: Note 236: - Net and/or Bus has 2 names -- D1 and D14.
viewbase: Note 236: - Net and/or Bus has 2 names -- D1 and D13.
viewbase: Note 236: - Net and/or Bus has 2 names -- D1 and D12.
viewbase: Note 236: - Net and/or Bus has 2 names -- D1 and D11.
viewbase: Note 236: - Net and/or Bus has 2 names -- D1 and D9.
viewbase: Note 236: - Net and/or Bus has 2 names -- D1 and D8.
viewbase: Note 236: - Net and/or Bus has 2 names -- D1 and D7.
viewbase: Note 236: - Net and/or Bus has 2 names -- D1 and D6.
viewbase: Note 236: - Net and/or Bus has 2 names -- D1 and D4.
viewbase: Note 236: - Net and/or Bus has 2 names -- D1 and D3.
viewbase: Note 236: - Net and/or Bus has 2 names -- D1 and D2.
viewbase: Note 236: - Net and/or Bus has 2 names -- D1 and D0.
我把d1 去掉后,他就说d2有问题。
好奇怪,哪里没有弄对呢?
bu hui de ba!
网络或总线重复命名了,或者总线名和连到他上面的网络的名称不一致。你仔细检查一下你原理图的网络名和总线名,有没有重复或不一致的地方,注意一下你的sym上有没有附加的网络名。