CCS5.4和XDS510连接不上，显示Failure due to the controller command-finish taking too long.

如题，我用的是CCS5.4和XDS510，驱动已经正常安装了，但是在测试连接的时候，显示了Failure due to the controller command-finish taking too long.具体内容如下，请问各位大神这是怎么什么情况。
[Start]
Execute the command:
%ccs_base%/common/uscif/dbgjtag.exe -f %boarddatafile% -rv -o -F inform,logfile=yes -S pathlength -S integrity
[Result]

-----[Print the board config pathname(s)]------------------------------------
C:\Users\lysh1992\AppData\Local\.TI\693494126\
    0\0\BrdDat\testBoard.dat
-----[Print the reset-command software log-file]-----------------------------
This utility has selected a 100- or 510-class product.
This utility will load the adapter 'seedjca8990isa.dll'.
The library build date was 'Apr  1 2013'.
The library build time was '23:55:08'.
The library package version is '5.1.73.0'.
The library component version is '35.34.40.0'.
The controller does not use a programmable FPGA.
The controller has a version number of '1' (0x00000001).
The controller has an insertion length of '16' (0x00000010).
This utility will attempt to reset the controller.
A error occurred while attempting to reset the controller.
-----[An error has occurred and this utility has aborted]--------------------
This error is generated by TI's USCIF driver or utilities.
The value is '-342' (0xfffffeaa).
The title is 'SC_ERR_HUNG_COMMAND'.
The explanation is:
Failure due to the controller command-finish taking too long.
[End]

不支持

没遇到过！

要跟仿真器厂家建议

我的也是

我的是win8,,64位的，小编如果解决的话麻烦你写一下哟，

同问 解决了没有