tds/xds 510-usb2.0仿真器连接问题
时间：10-02
整理：3721RD
点击：
安装了tds/xds usb2.0驱动，但不管连接tds仿真器还是xds仿真器，电脑上均显示的是xds510 的设备。每次打开CCS3.3进行连接仿真器的操作时，都会提示下面的错误：an't Initialize Target CPU:Error 0x80002240/-180
Fatal Error during: Initialization, OCS, Control,
This error was generated by TI's USCIF driver.
SC_ERR_CTL_NO_TRG_POWER
The controller has detected a target power loss.
The user may have failed to turn-on or connect its source.
I/O Port = 240
Board Name: C5402 XDS510 Emulator
Cpu Name: CPU_1
Abort: Close Code Composer Studio.
Retry: Try to initialize the target again.
Ignore: Ignore the initialization error and start
without target debugging access.
Diagnostic: Run diagnostic utility.
这个问题已经困扰我好几天了，有大神能够帮助我的吗?
Fatal Error during: Initialization, OCS, Control,
This error was generated by TI's USCIF driver.
SC_ERR_CTL_NO_TRG_POWER
The controller has detected a target power loss.
The user may have failed to turn-on or connect its source.
I/O Port = 240
Board Name: C5402 XDS510 Emulator
Cpu Name: CPU_1
Abort: Close Code Composer Studio.
Retry: Try to initialize the target again.
Ignore: Ignore the initialization error and start
without target debugging access.
Diagnostic: Run diagnostic utility.
这个问题已经困扰我好几天了，有大神能够帮助我的吗?
是没配置好吧 好像有个cfg文件把
谢谢小编分享资料信息！