请问LTE中RN Reconfiguration是什么意思？
时间：05-22
整理：3721RD
点击：
如题。
1> if the systemInfoChange is included:
2> if the systemInformationBlockType1 is included:
3> act upon the received SystemInformationBlockType1 as specified in 5.2.2.7;
2> if the SystemInformationBlockType2 is included:
3> act upon the received SystemInformationBlockType2 as specified in 5.2.2.9;
1> if the rn-SubframeConfig is included:
2> reconfigure lower layers in accordance with the received FDD-SubframeConfig or TDD-SubframeConfig;
2> if the rpdcch-Config is included:
3> reconfigure lower layers in accordance with the received rpdcch-Config;
1> submit the RNReconfigurationComplete message to lower layers for transmission, upon which the procedure ends;
RN reconfiguration
The purpose of this procedure is to configure/reconfigure the RN subframe configuration and/or to update the system information relevant for the RN in RRC_CONNECTED.
5.9.1.2 Initiation
E-UTRAN may initiate the RN reconfiguration procedure to an RN in RRC_CONNECTED when AS security has been activated.5.9.1.3 Reception of an RNReconfiguration
The RN shall:1> if the systemInfoChange is included:
2> if the systemInformationBlockType1 is included:
3> act upon the received SystemInformationBlockType1 as specified in 5.2.2.7;
2> if the SystemInformationBlockType2 is included:
3> act upon the received SystemInformationBlockType2 as specified in 5.2.2.9;
1> if the rn-SubframeConfig is included:
2> reconfigure lower layers in accordance with the received FDD-SubframeConfig or TDD-SubframeConfig;
2> if the rpdcch-Config is included:
3> reconfigure lower layers in accordance with the received rpdcch-Config;
1> submit the RNReconfigurationComplete message to lower layers for transmission, upon which the procedure ends;