关于诺西软件tang的问题，求大神解答

请问诺西2G后台的一个MML工具tang、我想请问下我有 BSC网管帐号密码和网管地址，请问怎么配置诺西[Connections]点击LOAD导入的.ini文件？ 那个send str 是什么？需要从那里要？ 求大神解释下

有的朋友说SEND STR 可以空着也可以等进去

我用下面这样的配置

[Connections]

Connections="BSC数"

Connection1=XX_BSC001,Telnet,网管地址,‘BSC帐号’,‘密码’,

但是进去tang 点击左边的BSC，他显示的

-----------------------------------------------------------------------         

Cisco Configuration Professional (Cisco CP) is installed on this device.        

This feature requires the one-time use of the username "cisco" with the         

password "cisco". These default credentials have a privilege level of 15.       

YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE  PUBLICLY-KNOWN      

CREDENTIALS                                                                    

Here are the Cisco IOS commands.                                                

username <myuser>  privilege 15 secret 0 <mypassword>                          

no username cisco                                                              

Replace <myuser> and <mypassword> with the username and password you want       

to use.                                                                        

IF YOU DO NOT CHANGE THE PUBLICLY-KNOWN CREDENTIALS, YOU WILL NOT BE ABLE       

TO LOG INTO THE DEVICE AGAIN AFTER YOU HAVE LOGGED OFF.                        

For more information about Cisco CP please follow the instructions in the       

QUICK START GUIDE for your router or go to http://www.cisco.com/go/ciscocp      

-----------------------------------------------------------------------         

User Access Verification                                                        

Username:                                                                      

Username: