关于JTAG的问题
时间：10-02
整理：3721RD
点击：
Error connecting to the target:
Error 0x80000262/-1154
Fatal Error during: Memory, Execution, Initialization, OCS,
The memory at 0x00000000 continually indicated it was \'not ready\'
The emulator was unable to regain control of the processor.
The processor must be reset.
Sequence ID: 0
Error Code: -1154
Error Class: 0x80000262
Board Name: C64xx Rev 1.1 TDS560USB Emulator - WintechDigital
Cpu Name: CPU_1
Abort: Close Code Composer Studio.
Retry: Try to connect to the target again.
Cancel: Remain disconnected from the target
Diagnostic: Run diagnostic utility.
这是什么原因，请高手指教。
Error 0x80000262/-1154
Fatal Error during: Memory, Execution, Initialization, OCS,
The memory at 0x00000000 continually indicated it was \'not ready\'
The emulator was unable to regain control of the processor.
The processor must be reset.
Sequence ID: 0
Error Code: -1154
Error Class: 0x80000262
Board Name: C64xx Rev 1.1 TDS560USB Emulator - WintechDigital
Cpu Name: CPU_1
Abort: Close Code Composer Studio.
Retry: Try to connect to the target again.
Cancel: Remain disconnected from the target
Diagnostic: Run diagnostic utility.
这是什么原因，请高手指教。
请问你用的是原装的仿真器吗?
貌似你用的是闻亭的仿真器 这个你要到闻亭的网站上去问嘛
用的是闻亭的 ＴＤＳ560 usb 的仿真器，上电后ＪＴＡＧ的引脚电平正常，用ｒｅｓｅｔ ｔｄｓ５６０ 和ｐｒｏｂｅ ｔｄｓ５６０ 都正确，但是打开ｃｃｓ后ｃｏｎｎｅｃｔ的时候就出现上述错误，不知道什么原因