大家遇到过这种问题吗？！

Can\'t Initialize Target CPU:
Error 0x80002240/-172
Fatal Error during: Initialization, OCS, Control,
This error was generated by TI\'s USCIF driver.

SC_ERR_REG_DETECT_SPRT <-172>
The wrong support-logic port value has been used.
A controller cannot be detected even though the
selected port does match the hardware configuration.
The standard 560 ports are 0x0, 0x1, 0x2 and 0x3.
The standard EVM ports are 0x0, 0x1, 0x2 and 0x3.
The standard DSK ports are 0x378, 0x278 and 0x3BC.
The standard 510 ports are 0x240, 0x280, 0x320 and 0x340.

I/O Port = 240

Board Name: C5416 XDS510 Emulator
Cpu Name: CPU_1

Abort: Close Code Composer Studio.
Retry: Try to initialize the target again.
Ignore: Ignore the initialization error and start
without target debugging access.
Diagnostic: Run diagnostic utility.

USB接口能reset成功，但是打开CCS时出现以上问题，请教大家遇到过这种问题吗?！

请问哪位高手指点迷津啊，不胜感激哦。

仿真器：USB2.0 510
CCS2.2和3.1
目标CPU：2407A或者2812。