微波EDA网,见证研发工程师的成长!
首页 > 研发问答 > 无线和射频 > TI Zigbee设计交流 > zigbee抓包失败

zigbee抓包失败

时间:10-02 整理:3721RD 点击:

我zigbee用的是cc2530,移植的协议栈是1.2.2a。现在用仿真器连接zigbee开发板,用packet sniffer软件来抓包,按下开始之后弹出以下错误

你的抓包板子有没有烧入抓包的固件?

C:\Texas Instruments\SmartRF Tools\Packet Sniffer\bin\general\firmware\sniffer_fw_cc2530.hex


SmartRF Protocol Packet Sniffer

(ACTIVE) PACKET-SNIFFER

Description & Features

Technical Documents

Support & Training

Order Now

Order Now
  
Part Number Buy from Texas Instruments or Third Party Alert Me Status Current Version   Version Date   Host   OS  

PACKET-SNIFFER-2:
SmartRF Packet Sniffer 2

Free

ACTIVE v1.2.0  29-Sep-2017  TI-RTOS  MS Windows 

PACKET-SNIFFER:
SmartRF Protocol Packet Sniffer

Free

ACTIVE v2.18.1  30-Jun-2014     

Key Document

  • SmartRF™ Packet Sniffer User's Manual (Rev. G) (PDF 1259 KB) 
    30 Jun 2014  6,625 views

  • View All Technical Documents (1)

Description

SmartRF Packet Sniffer 2

SmartRF Packet Sniffer 2 includes software and firmware to capture and display over-the-air packets. The capture device is connected to the PC via USB. SmartRF Packet Sniffer 2 supports the CC13xx and CC26xx family of devices as capture device and uses Wireshark for packet display and filtering. The supported protocols are listed in the table below.

SmartRF Packet Sniffer 2 includes the following components:

  • PC tool (SmartRF Sniffer Agent) for configuration and communication with the capture device
  • Firmware that enables CC13xx or CC26xx Launchpads to be used as capture device
  • Firmware source code
  • Dissectors for Wireshark (IEEE 802.15.4ge and TI Radio Packet Info dissectors)

The SmartRF Sniffer Agent is used to configure and communicate with the capture device and forwards packets to Wireshark. SmartRF Sniffer Agent runs on Windows 7 and Windows 10.

Features:

  • Packet sniffer for IEEE 802.15.4, ZigBee and Thread networks
  • Packet sniffer for IEEE 802.15.4ge (TI 15.4 Stack) networks
  • Packet sniffer for TI EasyLink protocol

The table below shows the supported protocols and which HW platform to use:

Protocol Capture device
IEEE 802.15.4/ZigBee/Thread (2.4 GHz) LAUNCHXL-CC2650
LAUNCHXL-CC26X2R1
IEEE 802.15.4ge (sub-1 GHz) LAUNCHXL-CC1350
LAUNCHXL-CC1310
EasyLink (sub-1 GHz) LAUNCHXL-CC1350
LAUNCHXL-CC1310

Installation recommendations:

  • Download Wireshark version 2.4.x from https://www.wireshark.org/.
  • Install Wireshark version 2.4.x to default location on your machine.
  • Download the SmartRF Packet Sniffer 2 ZIP file to your hard drive.
  • Unzip the ZIP file.
  • Run the installer executable (requires administrator privileges) and follow the instructions.
  • When prompted “Copy dissector plugins to this Wireshark installation” click OK.
SmartRF Protocol Packet Sniffer

The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient way, with options for filtering and storage to a binary file format.

Features:

  • Packet sniffer for Bluetooth® low energy networks.
  • Packet sniffer for ZigBee and IEEE 802.15.4 networks.
  • Packet sniffer for RF4CE networks.
  • Packet sniffer for SimpliciTI™ networks.
  • Packet sniffer for generic protocols (raw packet data).
  • Save/Open file with captured packets.
  • Select fields to be displayed and hidden.
  • Filtering of packets to be displayed.
  • Packet details by display of raw data received by the radio.
  • Accurate timestamping of received packets.
  • Address book with list of all known nodes in the network.
  • A simple time line that displays all packets in the sequence they have been received.
  • Possibility to forward captured data to a UDP socket for real time monitoring of packets using custom tools

Copyright © 2017-2020 微波EDA网 版权所有

网站地图

Top