ZStatus_t枚举在哪里定义

ZStatus_t在哪里定义的，只找到是uint8类型，枚举定义在哪

不是枚举。这个类型既可以作为nwk层的API调用的返回值，应用层也有使用， Security status 的状态也使用它，主要定义在zcomdef.h.

不用纠结，真正反映zigbee状态的变量不是这个定义，而是下面的

网络层状态：

typedef enum
{
NWK_INIT,
NWK_JOINING_ORPHAN,
NWK_DISC,
NWK_JOINING,
NWK_ENDDEVICE,
PAN_CHNL_SELECTION,
PAN_CHNL_VERIFY,
PAN_STARTING,
NWK_ROUTER,
NWK_REJOINING
} nwk_states_t;

和应用层的

typedef enum
{
DEV_HOLD, // Initialized - not started automatically
DEV_INIT, // Initialized - not connected to anything
DEV_NWK_DISC, // Discovering PAN's to join
DEV_NWK_JOINING, // Joining a PAN
DEV_NWK_SEC_REJOIN_CURR_CHANNEL, // ReJoining a PAN in secure mode scanning in current channel, only for end devices
DEV_END_DEVICE_UNAUTH, // Joined but not yet authenticated by trust center
DEV_END_DEVICE, // Started as device after authentication
DEV_ROUTER, // Device joined, authenticated and is a router
DEV_COORD_STARTING, // Started as Zigbee Coordinator
DEV_ZB_COORD, // Started as Zigbee Coordinator
DEV_NWK_ORPHAN, // Device has lost information about its parent..
DEV_NWK_KA, // Device is sending KeepAlive message to its parent
DEV_NWK_BACKOFF, // Device is waiting before trying to rejoin
DEV_NWK_SEC_REJOIN_ALL_CHANNEL, // ReJoining a PAN in secure mode scanning in all channels, only for end devices
DEV_NWK_TC_REJOIN_CURR_CHANNEL, // ReJoining a PAN in Trust center mode scanning in current channel, only for end devices
DEV_NWK_TC_REJOIN_ALL_CHANNEL // ReJoining a PAN in Trust center mode scanning in all channels, only for end devices
} devStates_t;