how to include sensor controller task in zigbee sample project

hi all

Q.我司有個需求是在休眠中,可經由程序或周邊i/o(狀態)等.

來開啓pwn,adc and i/o來控制周邊(led or buzzer). 但不需要開啓通訊的功能.

因此,就 CC26xx 及CC 13xx 依CC13xx, CC26xx SimpleLink Wireless MCU Technical Reference Manual issue:

就上述內容,應可以"Sensor Controller"來達成目的.

但對於這一方面,

我目前有幾點問題.

A.Sensor Controller Studio ,產生後的相關檔案

(main.c,scif.h/.c , scif_framework.c/.h and scif_osal_none.c/.h)

要如何整合入我的Zigbee project

B.因Sensor Controller可在 power-down mode中動作,

我要如何進入及驗証這個行為.

C.可進一步提供對於Sensor Controller的資訊.

I will be grateful for any help you can provide.

ref: https://www.deyisupport.com/question_answer/wireless_connectivity/bluetooth/f/103/t/96397.aspx

目前已将SCS(sensor controller studio)的blink project加入.

但有些问题,仍需帮忙

0.并没有正常动作.但blink led (sensor controller )可以动作.ref: 附件

1.如何验证 power down mode ?

2.在共用资源(介面i/o or spi /i2c))时,又要如何处理?

3.integrating "LED Blinker" project into SampleSwitch project,

  in my platform ,it show a warning about the linker : how to solve it ? it information overlap in the vector .

"Warning[Lp023]: absolute placement (in [0x20000000-0x200000c7]) overlaps with reserved areas: C:\ti\simplelink\zstack_home_1_02_02a_44539\Projects\zstack\HomeAutomation\SampleSwitch\CC26xx\cc26xx_app.icf 178"

附件工程利用SCE工程，把UART功能上去，也就是SCE使能UART处于接收状态，当接收到的数据达到一定程度以后，唤醒M3。

直接把Zip解压到下面目录下

C:\ti\simplelink\zstack_home_1_02_02_42930\Projects\zstack\HomeAutomation

你可以参考下。

谢谢！1538.SampleDoorLock - SCE.zip