关于2530加2591的问题

自己设计中没有使用，推荐设计2530与2591的管脚连接方式。新的连接方式为:paen P01, end P06,hgm p07. 在协议桟中该如何更改管脚配置

参考 http://www.ti.com/lit/an/swra290/swra290.pdf 第3页可知

1) P0_7 can be moved to any GPIO pin, and the macros below HAL_PA_LNA_RX_LGM() and HAL_PA_LNA_RX_HGM() must be modified accordingly.

2) P1_1 and P1_4 are a subset of GPIO pins (only P1.0-P1.5) that can be configured to support special RF observation output control signals. PAEN and EN of the CC2591 are directly controlled by these signals via the radio core logic of the CC2530.

不能随意设置IO口

非常感谢！