请教ZHome1.2.2工程编译问题

IAR ARM 7.3版本，打开最新版的ZHome1.2.2的工程提示以上错误

注，打开BLE的CC2650的工程师没有问题的，IAR的补丁已打好。

请问如何解决？O(∩_∩)O谢谢

开始的提示是工程配置损坏，重装过协议栈也不行

@x lv

应该是芯片的类型没有选，

选择好后，包括选择好下载方式为XDS100V3下载后也不会运行，可以下载

下载Zstack Core的时候没问题，进入仿真有运行的箭头，下载Zstack App时进入仿真的时候没有运行的箭头

下载后这样，没有运行的箭头

原因是因为你拿到的芯片是PG2.1版本的，请做如下的修改，就可以了

Q: I am using pre-release silicon (Rev2.0 or Rev2.1) and my software does not run. When I stop the CPU is stopped in a function called hisCodeIsBuiltForCC26xxHwRev22AndLater_HaltIfViolated. What is wrong?

A:

The default CC26XXWARE path to setup files / drivers is set to support release material (Rev2.2). To run the software on older material this variable needs to be changed.

IAR:

• Goto Tools->Configure Customer Argument Variables-->CC26xx TI-RTOS-->CC26XXWARE

Modifiy CC26XXWARE

• From: C:\ti\tirtos_simplelink_2_11_01_09\products\cc26xxware_2_20_06_14829
• To  C:\ti\tirtos_simplelink_2_11_01_09\products\cc26xxware_2_00_06_14829
• Delete OS kernel libraries folder: IAR\Application\CC2640\configPkg
• Delete OS kernel source build folder: IAR\Config\src
• Close workspace and re-open for changes to take effect

谢谢VV

LZ.

我也遇到你这个问题了，你的是怎么解决的，

楼上说的

Goto Tools->Configure Customer Argument Variables-->CC26xx TI-RTOS-->CC26XXWARE
Modifiy CC26XXWARE

From: C:\ti\tirtos_simplelink_2_11_01_09\products\cc26xxware_2_20_06_14829
To C:\ti\tirtos_simplelink_2_11_01_09\products\cc26xxware_2_00_06_14829
Delete OS kernel libraries folder: IAR\Application\CC2640\configPkg
Delete OS kernel source build folder: IAR\Config\src
Close workspace and re-open for changes to take effect

是怎么修改？

@yaping hu

不是写清楚了怎么修改么