微波EDA网,见证研发工程师的成长!
首页 > 研发问答 > 无线和射频 > TI WIFI设计交流 > CC3200 AP模式下,怎么实现连接多个设备,怎么主动断开连接?

CC3200 AP模式下,怎么实现连接多个设备,怎么主动断开连接?

时间:10-02 整理:3721RD 点击:

TI的工程师,你好!

   CC3200 AP模式下

   1.怎么实现连接多个设备

    

   2.怎么主动断开连接?

  能否提供些思路?需要用到哪些API?

  谢谢!

目前CC3200是configuration AP,只是支持一个设备连上了做配置,不支持多台设备。

您好!

          那下一次sdk更新会支持AP连接多个设备吗?

Frank,

这不是SDK更新版本的问题了,需要芯片版本更新才能支持,目前已在计划中,出来后TI会有推送信息发给各位的。谢谢!

TI 工程师,您好:

        您的意思是CC3200作为AP时,同一时刻只能连接一个STA?无法实现多个STA之间相互切换吗?

        那么CC3100呢?CC3100也是可以作为AP的,它可以实现同一时刻同时连接多个STA的功能吗?或者多个STA直接可以相互切换吗?

目前版本的CC3100和CC3200都之只能实现做AP时,连接一个SAT的功能。

如果要切换的话,这个可以通过软件去实现。

那STA模式,能建立多少个连接,或者说支持多少个TCP 套接字?

Hi SZ1,

         现在是否有新的CC3200芯片,当它做AP时候,可以支持接入4个STATION。谢谢!

TI后面会有CC3200的升级芯片推出,最大可支持4个Station,请关注TI的官网资料介绍。

请问现在最新的芯片支持多个设备连接了吗?哪里可以查到最新的信息?

目前的芯片还是支持一个设备连接,最新的信息就是在ti.com上搜索CC3200就可以获得了。

请告知具体查询位置。我在ti.com上搜索CC3200读了器件描述,没有找到哪个位置有写能接入1个设备或者4个设备。现在我们想开发接入4个设备的产品,因此需要确认该器件是否升级过,最好得到官方的数据。谢谢。

如果要支持连接4个设备,建议使用CC3200的升级芯片CC3220,这颗芯片可以支持4个Station的连接,而且还有CC3220SF版本内置了1M的Flash空间给客户使用

并且新的CC3220支持IPv6。

http://www.ti.com.cn/product/cn/CC3220?keyMatch=CC3220&tisearch=Search-CN-Everything

  • CC3220x SimpleLink™ Wi-Fi® Wireless Microcontroller Unit (MCU) System-on-Chip (SoC) is a Single-Chip With Two Separate Execution Environments: a User Application Dedicated ARM® Cortex®-M4 MCU and a Network Processor MCU to Run All Wi-Fi and Internet Logical Layers
  • Chip-Level, Wi-Fi Alliance Wi-Fi CERTIFIED
  • Applications Microcontroller Subsystem
    • ARM Cortex-M4 Core at 80 MHz
    • Embedded Memory
      • The CC3220R and CC3220S Variants Include 256KB of RAM
      • The CC3220SF Variant is a Flash-Based Wireless MCU With Integrated 1MB of Flash and 256KB of RAM
      • External Serial Flash
    • McASP Supports Two I2S Channels
    • SD
    • SPI
    • I2C
    • UART
    • 8-Bit Parallel Camera
    • Four General-Purpose Timers With 16-Bit PWM Mode
    • Watchdog Timer
    • 4-Channel 12-Bit ADCs
    • Up to 27 GPIO Pins
    • Debug Interfaces: JTAG, cJTAG, SWD
  • Wi-Fi Network Processor (NWP) Subsystem
    • Wi-Fi Internet-on-a-chip Dedicated ARM MCU Completely Offloads Wi-Fi and Internet Protocols from the Application MCU
    • Wi-Fi Modes:
      • 802.11b/g/n Station
      • 802.11b/g Access Point (AP) Supports up to Four Stations
      • Wi-Fi Direct Client and Group Owner
    • WPA2 Personal and Enterprise Security: WEP, WPA/WPA2 PSK, WPA2 Enterprise (802.1x)
    • IPv4 and IPv6 TCP/IP Stack
    • Industry-Standard BSD Socket Application Programming Interfaces (APIs)
      • 16 Simultaneous TCP or UDP Sockets
      • 6 Simultaneous TLS and SSL Sockets
    • IP Addressing: Static IP, LLA, DHCPv4, DHCPv6 With DAD
    • SimpleLink Connection Manager for Autonomous and Fast Wi-Fi Connections
    • Flexible Wi-Fi Provisioning With SmartConfig Technology, AP Mode, and WPS2 Options
    • RESTful API Support Using the Internal HTTP Server
    • Embedded Network Applications Running on Dedicated Network Processor
    • Wide Set of Security Features:
      • Hardware Features:
        • Separate Execution Environments
        • Device Identity
        • Hardware Crypto Engine for Advanced Fast Security, Including: AES, DES, 3DES, SHA2, MD5, CRC, and Checksum
        • Initial Secure Programming:
          • Debug Security
          • JTAG and Debug Ports are Locked
        • Personal and Enterprise Wi-Fi Security
        • Secure Sockets (SSLv3, TLS1.0/1.1/TLS1.2)
      • Networking Security
        • Personal and Enterprise Wi-Fi Security
        • Secure Sockets (SSLv3, TLS1.0, TLS1.1, TLS1.2)
        • HTTPS Server
        • Trusted Root-Certificate Catalog
        • TI Root-of-Trust Public key
      • SW IP Protection
        • Secure Key Storage
        • File System Security
        • Software Tamper Detection
        • Cloning Protection
        • Secure Boot: Validate the Integrity and Authenticity of the Runtime Binary During Boot
    • Embedded Network Applications Running on the Dedicated Network Processor
      • HTTP/HTTPS Web Server With Dynamic User Callbacks
      • mDNS, DNS-SD, DHCP Server
      • Ping
    • Recovery Mechanism—Can Recover to Factory Defaults or to a Complete Factory Image
    • Wi-Fi TX Power
      • 18.0 dBm @ 1 DSSS
      • 14.5 dBm @ 54 OFDM
    • Wi-Fi RX Sensitivity
      • –96 dBm @ 1 DSSS
      • –74.5 dBm @ 54 OFDM
    • Application Throughput
      • UDP: 16 Mbps
      • TCP: 13 Mbps
  • Power-Management Subsystem
    • Integrated DC-DC Converters Support a Wide Range of Supply Voltage:
      • VBAT Wide-Voltage Mode: 2.1 V to 3.6 V
      • VIO is Always Tied With VBAT
      • Preregulated 1.85-V Mode
    • Advanced Low-Power Modes
      • Shutdown: 1 µA
      • Hibernate: 4.5 µA
      • Low-Power Deep Sleep (LPDS): 135 µA (Measured on CC3220R, CC3220S, and CC3220SF With 256-KB RAM Retention)
      • RX Traffic (MCU Active): 59 mA (Measured on CC3220R and CC3220S; CC3220SF Consumes an Additional 10 mA) @ 54 OFDM
      • TX Traffic (MCU Active): 223 mA (Measured on CC3220R and CC3220S; CC3220SF Consumes an Additional 15 mA) @ 54 OFDM, Maximum Power
      • Idle Connected (MCU in LPDS): 710 µA (Measured on CC3220R and CC3220S With 256-KB RAM Retention) @ DTIM = 1
  • Clock Source
    • 40.0-MHz Crystal With Internal Oscillator
    • 32.768-kHz Crystal or External RTC
  • RGK Package
    • 64-Pin, 9-mm × 9-mm Very Thin Quad Flat Nonleaded (VQFN) Package, 0.5-mm Pitch
  • Operating Temperature
    • Ambient Temperature Range: –40°C to +85°C
  • Device Supports SimpleLink Developers Ecosystem

谢谢Terry的最新信息,官方现在有推出的评估板吗?

你好,

官方的评估板大约会这三月份陆续供货,全新的CC3220评估板,最新的进展请关注TI官方网站信息。

Copyright © 2017-2020 微波EDA网 版权所有

网站地图

Top