CC3200怎么设置为AP模式

CC3200怎么设置为AP模式？又工作在monitor监听模式，麻烦给解答一下，谢谢

参考例程：getting_started_with_wlan_ap

注意必须连接串口，通过串口输入AP的名字，启动AP。

static int ConfigureMode(int iMode)
{
char pcSsidName[33];
long lRetVal = -1;

UART_PRINT("Enter the AP SSID name: ");
GetSsidName(pcSsidName,33); //(1)获取Name

lRetVal = sl_WlanSetMode(ROLE_AP); //(2)配置成AP模式
ASSERT_ON_ERROR(lRetVal);

lRetVal = sl_WlanSet(SL_WLAN_CFG_AP_ID, WLAN_AP_OPT_SSID, strlen(pcSsidName),(unsigned char*)pcSsidName); //(3)配置AP信息 ---未加密
ASSERT_ON_ERROR(lRetVal);

UART_PRINT("Device is configured in AP mode\n\r");

/* Restart Network processor */
lRetVal = sl_Stop(SL_STOP_TIMEOUT); //<1>先停止NWP

// reset status bits
CLR_STATUS_BIT_ALL(g_ulStatus);

return sl_Start(NULL,NULL,NULL); //<2>启动NWP-使sl_WlanSetMode(ROLE_AP)生效！
}