CC3200MOD 程序如何烧录和调试

请问CC3200MOD  有专门的烧录和调试硬件吗？

没有。

建议如果是研发阶段可以购买29$的LaunchPad，有模块版的. 把模块做到了板子上会比较简单，引出相应的接口就好。

烧录只需要使用串口（任何usb-to-uart能连PC就行），调试可以用Lauchpad上的jtag口

我刚刚在TI E2E上看到解决方案

附上：My suggestion was to keep only the CC3200MOD on your board. then have 5 test points + GND on your board. You could use another Launchpad with the 4 JTAG lines + GND conected to some wire with a connector. Then you can use the Launchpad itself to connect to your target board. Does this make sense..

Or else, there is XDS100 emulator from TI which also works. You could also buy a standard FTDI board which you can program to work as an emulator.

谢谢你们。

好的，感谢！

你可以参考下cc3200r1M2下载调试

好，我参考了，感谢！