CC3200 怎么用IAR通过jtag烧录固件

烧录编译好的固件...原本是用uniflash烧录的..然后一直烧不不上...说重启设备..然后重启了没什么反应就打算用jlink烧了

[16:52:14] Begin Format operation.
[16:52:15] INFO: > Executing Operation: Connect
[16:52:17] INFO: setting break signal
[16:52:17] INFO: --- please restart the device ---
[16:52:28] ERROR: ---reading ACK signal failed---
[16:52:28] WARNING: ---seting break signal to false failed---
[16:52:30] INFO: setting break signal
[16:52:30] INFO: --- please restart the device ---
[16:52:40] ERROR: ---reading ACK signal failed---
[16:52:40] WARNING: ---seting break signal to false failed---
[16:52:42] INFO: setting break signal
[16:52:42] INFO: --- please restart the device ---
[16:52:42] Cancelling current process <Format>, please wait...
[16:52:56] ERROR: ---reading ACK signal failed---
[16:52:56] WARNING: ---seting break signal to false failed---
[16:52:58] INFO: setting break signal
[16:52:58] INFO: --- please restart the device ---
[16:52:58] INFO: Cancel button pressed
[16:52:58] WARNING: ---seting break signal to false failed---
[16:52:58] FATAL: --- Can't connect to device !! ---
[16:52:58] FATAL: Error connecting to the device. Please check your COM port settings. Error code: -2

IAR环境只能debug，不能烧录。

那怎么用jtag烧录

jtag不能烧录

可以实现，难度非常大！

目前CCS UniFlash对CC3200进行烧写只能通过UART串口下载，