执行sl_Start意外掉电后重启卡在sl_Start中问题
TI工程师你们好:
我在使用CC3200-LAUNCHXL开发板运行程序,发现如果在sl_Start函数执行中意外掉电的话,会导致再次调用sl_Start时不返回的情况，即使再次复位上电也是不返回,请问sl_Start函数内部是否有操作到CC3200内部的一些存储设备呢？我使用的CC3200-LAUNCHXL是4.1版本的。请帮忙看看，谢谢
TI工程师，你们好：
我现在使用TI SDK 1.0.0版本的里例子 getting_started_with_wlan_ap 测试启动掉电，也会发生这些问题，该例子我不作任何修改，用uniflash烧写到CC3200-LAUNCHXL上，在启动时掉电的话，有一定几率出现上述问题，一旦出现问题，即使是重新上电也恢复不过来了。下面是getting_started_with_wlan_ap 例子的Log
*************************************************
CC3200 WLAN AP Application
*************************************************
Host Driver Version: 1.0.0.1
Build Version 2.0.7.0.31.0.0.4.1.1.5.3.3
Device is configured in default state
Device started as STATION
Enter the AP SSID name:
*************************************************
CC3200 WLAN AP Application
*************************************************
Host Driver Version: 1.0.0.1
Build Version 2.0.7.0.31.0.0.4.1.1.5.3.3
Device is configured in default state
<-------------------------这里是掉电处..........
*************************************************
CC3200 WLAN AP Application
*************************************************
Host Driver Version: 1.0.0.1
Build Version 2.0.7.0.31.0.0.4.1.1.5.3.3
Error [-7] at line [564] in function [ConfigureSimpleLinkToDefaultState]
*************************************************
CC3200 WLAN AP Application
*************************************************
Host Driver Version: 1.0.0.1
Build Version 2.0.7.0.31.0.0.4.1.1.5.3.3
Error [-7] at line [564] in function [ConfigureSimpleLinkToDefaultState]
*************************************************
CC3200 WLAN AP Application
*************************************************
Host Driver Version: 1.0.0.1
Build Version 2.0.7.0.31.0.0.4.1.1.5.3.3
Error [-7] at line [564] in function [ConfigureSimpleLinkToDefaultState]
*************************************************
CC3200 WLAN AP Application
*************************************************
Host Driver Version: 1.0.0.1
Build Version 2.0.7.0.31.0.0.4.1.1.5.3.3
Error [-7] at line [564] in function [ConfigureSimpleLinkToDefaultState]
*************************************************
CC3200 WLAN AP Application
*************************************************
Host Driver Version: 1.0.0.1
Build Version 2.0.7.0.31.0.0.4.1.1.5.3.3
Error [-7] at line [564] in function [ConfigureSimpleLinkToDefaultState]
*************************************************
CC3200 WLAN AP Application
*************************************************
Host Driver Version: 1.0.0.1
Build Version 2.0.7.0.31.0.0.4.1.1.5.3.3
Error [-7] at line [564] in function [ConfigureSimpleLinkToDefaultState]
*************************************************
CC3200 WLAN AP Application
*************************************************
Host Driver Version: 1.0.0.1
Build Version 2.0.7.0.31.0.0.4.1.1.5.3.3
Error [-7] at line [564] in function [ConfigureSimpleLinkToDefaultState]
*************************************************
CC3200 WLAN AP Application
*************************************************
Host Driver Version: 1.0.0.1
Build Version 2.0.7.0.31.0.0.4.1.1.5.3.3
Error [-7] at line [564] in function [ConfigureSimpleLinkToDefaultState]