微波EDA网,见证研发工程师的成长!
首页 > 研发问答 > 无线和射频 > TI WIFI设计交流 > TI无线模组驱动软件

TI无线模组驱动软件

时间:10-02 整理:3721RD 点击:

现在我们正用TI DM385平台开发WI-FI CAMERA,但是WI-FI模组供应商MURATA告知下面的;

About LBEE5ZSTNC. 
(We call it, Type-TN) 
This module uses TI 1271 (WiFi + BT), it's not latest IC (Wilink6). 

[attachment "SP-ZSTN-C .pdf" deleted by Kaneo NOMIYAMA/CHN/MURATA_ASIA] 


Now, Wilink 8 series is latest one. 
We have  LBEP5CLWTC 
(We call it, Type-WT) 

[attachment "SP-CLWT-K.pdf" deleted by Kaneo NOMIYAMA/CHN/MURATA_ASIA] 

The big difference of these two module : 

Type-TN : Wilink6 (WL1271), 11b/g/n + BT4.0, with Antenna connector 
Type-WT : Wilink8 (WL1831), 11b/g/n + BT4.0, without Antenna connector 

Generally, we don't recommend Type-TN because it's not latest version of IC. 

However, if below condition, please let me know, I will check if we still support Type-TN. 
1. need "with" antenna connector type 
2. There is software limitation (need Wilink 6 IC).

我们需要确认,是否TI能提供适合WL1831的驱动软件为DM385平台,因为DM385平台建议用WL1271。

Peter Han

M.P: 187-96887281

Swenno Corp.

peter.han@swenno.com

DM385的参考设计是WL1271,但是可以用WL18XX,只需要把驱动集成到DM385的SDK里面就好了。

上一篇:cc3000芯片
下一篇:cc3200资料中文化

Copyright © 2017-2020 微波EDA网 版权所有

网站地图

Top