（HELP）CC2650恢复出厂设置后（长按两个键6s）无法开启，好像变砖了...手头也没有DevPack Debugger，有希望恢复吗，求工程师解答

之前由于官方的安卓源码编译的apk无法成功连接我的CC2650,刚好在一篇介绍里面看到了长按两个键可以复位到蓝牙智能模式（事实证明好像是个坑...

长按两个键大约6,7s红灯闪了一下，然后...我就再也没见到任何一个灯亮了，

当我看到这段介绍的时候我也是很惆怅的...

In a connected state the buttons operated differently from when the device is disconnected. Short key presses has no special interpretation, the state of the buttons is simply fed to the Simple Key Service. There are however two key press sequences that are dealt with is a separate way

• Power button pressed for three seconds: the SensorTag is disconnected
• Both buttons pressed for six seconds: factory settings are restored, i.e. the BLE image programmed at the factory is loaded from external flash and executed. This operation is only recommended if you are using a non-BLE image and want to return to BLE operation.

我的操作是很有问题...不过还是想求助一下工程师们...有没有什么拯救它的办法呢？

（CC2541的CC-debuger好像不能用，看到有文章说过，我也简单试了一下的确不行，可能引脚都不同吧）

额，没有debugger恐怕不行，需要debugger重新烧一下