CC2640手动配对绑定

如何实现通过lightblue先连接上设备，再通过lightblue发指令实现配对绑定？如果手动配对绑定不安全的，但是要是我一定要做，2640这边的程序代码要怎么改？

你好，

这个是可以实施的。

对你的bonding/pairing进行如下设置.

在static void SimpleBLEPeripheral_init(void)函数内：

// Setup the GAP Bond Manager
{
uint32_t passkey = 0; // passkey "000000"
uint8_t pairMode = GAPBOND_PAIRING_MODE_WAIT_FOR_REQ;
uint8_t mitm = TRUE;
uint8_t ioCap = GAPBOND_IO_CAP_DISPLAY_ONLY;
uint8_t bonding = TRUE;

GAPBondMgr_SetParameter(GAPBOND_DEFAULT_PASSCODE, sizeof(uint32_t),
&passkey);
GAPBondMgr_SetParameter(GAPBOND_PAIRING_MODE, sizeof(uint8_t), &pairMode);
GAPBondMgr_SetParameter(GAPBOND_MITM_PROTECTION, sizeof(uint8_t), &mitm);
GAPBondMgr_SetParameter(GAPBOND_IO_CAPABILITIES, sizeof(uint8_t), &ioCap);
GAPBondMgr_SetParameter(GAPBOND_BONDING_ENABLED, sizeof(uint8_t), &bonding);
}

配对改为等待主机请求

uint8_t pairMode = GAPBOND_PAIRING_MODE_WAIT_FOR_REQ;

IOcap改为no input no output即可

uint8_t ioCap = GAPBOND_IO_CAP_NO_INPUT_NO_OUTPUT;