CC2640烧写问题
时间:10-02
整理:3721RD
点击:
自己做的板子,仿真器用的XDS100V3,iar 7.4的,烧写连接引脚VCC,RESET,GND,TMS,TCK.模块有外部3.3V供电,但是烧写时出现错误
Tue May 19, 2015 09:45:45: Fatal error: Failed to connect to the XDS emulator (connect ICEPick)... (Error -183 @ 0x0) The controller has detected a cable break far-from itself. The user must connect the cable/pod to the target. (Emulation package 5.1.641.0)。说没有连接目标,请问怎么解决啊?谢谢
首先确认板上的cable质量有无问题,然后对照此文档的 “How to debug whether the JTAG scan path is broken” 的解决方案
文档地址忘贴了:http://processors.wiki.ti.com/index.php/Debugging_JTAG_Connectivity_Problems#Strategy_for_debugging_JTAG_connectivity_problems