Cannot Extend range of CC2540 by using CC2590

   Recently, in my project, I want to extend the range of CC2540 by using CC2590 orCC2591. May I ask some questions to you? Thanks a lot.

    1. In the BLE4.0 Stack, according to  swra422.pdf, I can find HCI_EXT_ExtendRfRangeCmd() in hci.h, but I can not find hci.c, so where can I find definition of HCI_EXT_ExtendRfRangeCmd()??

   2. Due to special application, we can not connect P1_1 to HGM, P1_2 to PA_EN, P1_3 to EN, we want to connect to P1_1 to PA_EN, P1_4 to EN, P0_7 to HGM, but how and where can I modify the code??

thanks you a lot

Chunyang,

you are welcome!

请看附件。 2590和 2541一起的guide.

1108.swra422_CC2590 Front End with CC2541.pdf

您好！我仔细研究过附件中的内容，但是对于以下来个问题，还是不明白，向您请教，希望能得到您的帮助。

  1. 根据swra422.pdf，我能够在hci.h中找到HCI_EXT_ExtendRfRangeCmd()这个函数的声明，但是我找不到hci.c，所以我哪里能够找到HCI_EXT_ExtendRfRangeCmd()这个函数的定义？

   2. 在我们的特定应用下，无法按照swra422.pdf中的说明，将 P1_1 连接到 HGM管脚，P1_2 连接到 PA_EN， P1_3 连接到 EN, 二是想将 P1_1 连接到 PA_EN， P1_4 连接到 EN, P0_7 连接到 HGM，我在哪能够修改管脚的映射关系??

万分感谢！

祝好！