TPA6130A2 热保护
时间:10-02
整理:3721RD
点击:
In the datasheet of TPA6130A2,
TA Operating free-air temperature range is –40°C to 85°C
TJ Operating junction temperature range is –40°C to 125°C
And in page 6 there are two parameters of Thermal shutdown, 1. Threshold 180 °C 2. Hysteresis 35 °C
这2个参数代表什么含义?
Thermal A 1 on this bit indicates a thermal shutdown was initiated by the hardware. When the temperature
drops to safe levels, the device will start to operate again, regardless of bit status. This bit is
clear-on-read.
当温度降到正常值,IC会重新启动,(不管寄存器的值);
温度降下来了,寄存器的值是否会自动变化?
该器件工作时的环境温度范围是–40°C to 85°C;对应的结温范围是–40°C to 125°C;
如果温度超过180°C,则会热保护;其迟滞是35°C(即当温度回落更低时解除过温保护,防止出现反复启停)
热保护的状态位不会自动清除,除非MCU读取状态后才自动清除。实际上,只要温度降下来器件会自动重启。