关于TLC1514的初始化问题

各位大大好！

TLC1514的初始化问题：

是直接写“A000+12位数据” 还是写“A000+AXXX” ?

在数据表中没太看明白。

谢谢！

A000h plus data Write CFR followed by 12-bit data

应该是 Axxx

第6页：

NOTE:
The device requires a write CFR (configuration register) with 000h data (write A000h to the serial
input) at power up to initialize host select mode.

第19页：

power up and initialization
Initialization requires:
1. Determine processor type by writing A000h to the TLC1514/18
2. Configure the device
The first conversion after power up or resuming from power down is not valid.

感觉应该是：

先写A000H；再写AXXXH