微波EDA网,见证研发工程师的成长!
首页 > 研发问答 > 硬件电路设计 > TI模拟硬件电路设计 > ths8200的VGA输人输出问题请教

ths8200的VGA输人输出问题请教

时间:10-02 整理:3721RD 点击:

我们公司向用贵公司的ths8200做一款1080P的VGA输出视频,要求输入是BT1120输入,VGA输出。这款ths8200能支持吗?那么低8bit数据是接在GY接口上,高8bit数据接在BCB接口上吗?谢谢!

Hi baoqiong,

Yes, the THS8200 does support BT.1120 1080p-30Hz.  The setup will be similar to 1080p-60Hz, but the pixel rate and clock will be 74.25MPPS instead of 148.5MPPS.

In general, BT.1120 with embedded syncs is supported by setting the input format to 20bit YCbCr 4:2:2, enabling the 4:2:2 > 4:4:4 interpolation filter, and enabling embedded EAV/SAV sync operation.  Other settings such as pixels per line, lines per frame/field, dtg_spec_x horizontal timing, and output sync amplitudes must be uniquely set depending on input format.

谢谢!这款只能支持1080I的VGA输出,那么您能不能推荐一款能支持1080P的方案给我们。非常感谢!

3755.THS8200 setups.zip

Hi baoqiong,

  THS8200 should support 1080p VGA,please check attached file for the setup.

我们在调试THS8200时图像能正常输出,但是图像很模糊不清,跟原来图像相比差太远了,您们能提供一些调试参数给我们吗?或者怎么样解决?谢谢!

Copyright © 2017-2020 微波EDA网 版权所有

网站地图

Top