微波EDA网,见证研发工程师的成长!
首页 > 研发问答 > 硬件电路设计 > TI模拟硬件电路设计 > PGA400-Q1EVM程序下不进,小白求解释,谢谢。

PGA400-Q1EVM程序下不进,小白求解释,谢谢。

时间:10-02 整理:3721RD 点击:

如题,下载hex文件出现如下报错:

ERROR - OTP Progamming was NOT successful. Please check the 'Error' Tab for more information
ERROR - Register 026A, was programmed to: 22, but read back: 00
ERROR - Register 0269, was programmed to: EF, but read back: 00
ERROR - Register 0268, was programmed to: 80, but read back: 00
ERROR - Register 0267, was programmed to: A3, but read back: 00
ERROR - Register 0266, was programmed to: 0D, but read back: 00
ERROR - Register 0265, was programmed to: F5, but read back: 00
ERROR - Register 0264, was programmed to: 0D, but read back: 00
ERROR - Register 0263, was programmed to: 25, but read back: 00
ERROR - Register 0262, was programmed to: 93, but read back: 00
。。。

小白求解释,多谢了。

要怎么设置才可以,多谢。。。

是不是没连上或者电没有供上,读回来全是0

供电正常,四个LED全亮。

你的测试环境是什么样子的?你提供的信息太少,从你的提示来看,是EEPROM通信问题。

这个是硬件连接,如图。

这个是上位机软件,初始设置,没有配置。求解。

请按照EVM user's guide 中的给出步骤进行操作,参考page24 “6.6.1 Load .HEX File into GUI” 部分,看在哪个环节出现了问题 http://www.ti.com/lit/ug/sldu010/sldu010.pdf

+5V稳压芯片貌似被烧掉了,整板供电已经成了+7.5V。。。

Hi Song Zhao,

请问,您现在PGA400的评估,进展如何了?

请检查整板供电是否正确?另外所选用PGA400GUI的版本号。

还有问题,请联系我处

Copyright © 2017-2020 微波EDA网 版权所有

网站地图

Top