烧prom时出现的问题
时间:10-02
整理:3721RD
点击:
在烧prom时他老是出现program failed,提示如下:
'2': Putting device in ISP mode...done.
'2': Putting device in ISP mode...done.
'2': Verifying device...Failed at address, 0'2': Verification Terminated
Programming of user selected options failed.
PROGRESS_END - End Operation.
Elapsed time =13 sec
我用的是ise8.1i,spartan 3e starter kit,芯片是xc3s500e,prom 是xcf04s
我试了n次还是不行,望高手指点一二。
'2': Putting device in ISP mode...done.
'2': Putting device in ISP mode...done.
'2': Verifying device...Failed at address, 0'2': Verification Terminated
Programming of user selected options failed.
PROGRESS_END - End Operation.
Elapsed time =13 sec
我用的是ise8.1i,spartan 3e starter kit,芯片是xc3s500e,prom 是xcf04s
我试了n次还是不行,望高手指点一二。
我用的是DE2板,不知道如何把IDE程序烧到FLASH去,很多人说还要定义目标板,不知道怎么弄,会的请指教,我的邮箱是zll0109@163.com
顶一下,难道大家都没遇到过这个问题么!