数据采集程序出了问题
时间：12-13
整理：3721RD
点击：
实验中要用一个采集数据的程序，以前一直能运行，但在一次系统优化后，就弹出error了。
Error -10401 occurred at AI Group Config
Possible reason(s):
NI-DAQ LV: The specified device is not a National Instruments product, the driver does not support the device (for example, the driver was released before the device was supported), or the device has not been configured using the Measurement & Automation Explorer.
labview看得不是很多，所以借贵地请教一下这方面的大牛，大概是什么原因，硬件or软件？不甚感激.
Error -10401 occurred at AI Group Config
Possible reason(s):
NI-DAQ LV: The specified device is not a National Instruments product, the driver does not support the device (for example, the driver was released before the device was supported), or the device has not been configured using the Measurement & Automation Explorer.
labview看得不是很多，所以借贵地请教一下这方面的大牛，大概是什么原因，硬件or软件？不甚感激.
既然以前没有问题，看你说的系统优化到底都做了些啥啊？
就用MAX重新配置下啊
非常感谢，系统优化是别人做的，具体情况我也不是很清楚。我照你说的先试试修改一下。
我觉得没准是你把驱动优化掉了