微波EDA网,见证研发工程师的成长!
首页 > 研发问答 > 测试测量 > 虚拟仪器 > Re: 关于生成独立安装文件问题

Re: 关于生成独立安装文件问题

时间:12-13 整理:3721RD 点击:
你有没有用到Vision?如果用到,这是一个已知问题:
There is a problem with the Vision 7.0 Run-Time Engine installer. A folder called PlugInControls does not get properly placed into the LabVIEW 7.1 Run-Time Engine directory. To fix this issue, go through the following steps.
Run the Vision 7.0.1 Run Time Engine Patch for the Deployment Engine. This step modifies the Vision 7.0 Run Time Engine installer
(vision70rte.exe) to the 7.0.1 version. This step may not be necessary, but if its possible I would recommend doing it.
Run the Vision 7.0 Run-Time Engine Installer (vision70rte.exe). Verify that it is the 7.0.1 version in Add/Remove Programs.
Copy the folder < National Instruments>\Shared\LabVIEW Run-Time\7.0\PlugInControls to the < National Instruments>\Shared\LabVIEW Run-Time\7.1 directory. This is the critical step that should eliminate the error.

多谢,我用的vision版本是7.1的,大概不是这个原因
不过由此知道了还需要Vision Run-Time Engine这东西,几个可能有用的链接备查
http://digital.ni.com/public.nsf/websearch/865A6AE6E52C755D862569A70062C903
http://digital.ni.com/public.nsf/websearch/F1699570F78FECBB86256B5200665134
http://digital.ni.com/public.nsf/allkb/86256F0E001DA9FD86256FF100612816
http://digital.ni.com/public.nsf/websearch/1a9a18aa574abedf86256f780062c240
可是就是这个Vision Run-Time Engine没地方找,看介绍是Vision Deployment Engine的一部分,但可以自由分发,应该是不需要license的,但是NI竟然不提供下载,郁闷

Copyright © 2017-2020 微波EDA网 版权所有

网站地图

Top