synopsys 安装提示site ID
启动sssverify验证license时提示PASSED！，但是Site ID处显示<No site ID> ，Issued on ：N/A（下文红色字体标出），不懂这个是什么意思。
learn@learn:~/eda/synopsys/scl/amd64/bin$ ./sssverify ~/eda/synopsys/license/synopsys.dat
Integrity check report for license file "/home/learn/eda/synopsys/license/synopsys.dat".
Report generated on 29-Oct-2019 (SCL_11.5)
---------------------------------------------------------
Checking the integrity of the license file....
Valid SSS feature found.
Licensed to mammoth//ZWT 2006
Siteid: <No Site Id>, Server Hostid: 000000000000, Issued on: N/A
License file integrity check PASSED！
---------------------------------------------------------
You may now USE this license file to start your license server.
Please don't edit or manipulate the contents of this license file.
之后启动lmstat。运行结果如下：提示lmgrd is not running：Cannot connet to license server system。
lmstat - Copyright (c) 1989-2011 Flexera Software, Inc. All Rights Reserved.
Flexible License Manager status on Tue 10/29/2019 22:53
License server status: 27000@learn
License file(s) on learn: /home/learn/eda/synopsys/license/synopsys.dat:
lmgrd is not running: Cannot connect to license server system. (-15,570:115 "Operation now in progress")
之后又运行 lmgrd，结果如下（只截取了最后snpslmd部分）：
(snpslmd) ------------------------------------------------------------------
(snpslmd) Checking the integrity of the license file....
(snpslmd) Valid SSS feature found.
(snpslmd) The feature is needed to enable the other keys in your license file.
(snpslmd) Licensed to mammoth//ZWT 2006
(snpslmd) Siteid: <No Site Id>, Server Hostid: 000000000000, Issued on: N/A
(snpslmd) ------------------------------------------------------------------
求大神帮忙分析一下，如何解决这个问题，是site id的问题吗?
注：hostid 是在scl/amd64/bin目录下运行lmhostid得到的，全是00000000000，因为我是用的vmware虚拟机下的ubuntu 15.0的系统，所以不知道这个lmhostid得到的hostid是不是会有影响?
产生lic的时候，网卡没填吧? 需要填虚拟机的网卡。
虚拟机应该可以和硬件共享一个mac地址吧?另外就是license是要在Windows下生成的，如果生成的Mac地址和虚拟机的一致，应该就可用。
改用Virtulbox，网卡随便写，可以复制主机的网卡。
以下是我在scl/amd64/bin/目录下运行 ifconfig -a得到的结果，ether结果就是mac地址吧，我之前也用了这个地址，但是license也没通过。
ens33: flags=4098<BROADCAST,MULTICAST>mtu 1500
ether 00:0c:29:68:23:0atxqueuelen 1000(Ethernet)
RX packets 0bytes 0 (0.0 B)
RX errors 0dropped 0overruns 0frame 0
TX packets 0bytes 0 (0.0 B)
TX errors 0dropped 0 overruns 0carrier 0collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING>mtu 65536
inet 127.0.0.1netmask 255.0.0.0
inet6 ::1prefixlen 128scopeid 0x10<host>
looptxqueuelen 1000(Local Loopback)
RX packets 38565bytes 2769452 (2.7 MB)
RX errors 0dropped 0overruns 0frame 0
TX packets 38565bytes 2769452 (2.7 MB)
TX errors 0dropped 0 overruns 0carrier 0collisions 0
大哥Virtulbox是什么?。怎么操作
license是在windows下生成的。
之前安装的是scl 11.5 今天又重新安装了11.9版本。运行sssverify 的时候license 能pass，但运行lmgrd的时候还是出现了这样的问题。只是在运行lmgrd的时候多出了几行提示，结果如下：
10/30/2019 23:00:41 (snpslmd) ------------------------------------------------------------------
10/30/2019 23:00:41 (snpslmd) Checking the integrity of the license file....
10/30/2019 23:00:41 (snpslmd) Valid SSS feature found.
10/30/2019 23:00:41 (snpslmd) The feature is needed to enable the other keys in your license file.
10/30/2019 23:00:41 (snpslmd) Licensed to mammoth//ZWT 2006
10/30/2019 23:00:41 (snpslmd) Siteid: <No Site Id>, Server Hostid: 000c2968230a, Issued on: N/A
10/30/2019 23:00:41 (snpslmd) ------------------------------------------------------------------
23:00:45 (snpslmd) SLOG: Statistics Log Frequency is 240 minute(s).
23:00:45 (snpslmd) SLOG: TS update poll interval is not set.
23:00:45 (snpslmd) SLOG: Activation borrow reclaim percentage is 0.
23:00:45 (snpslmd) (@snpslmd-SLOG@) ===============================================
23:00:45 (snpslmd) (@snpslmd-SLOG@) === Vendor Daemon ===
23:00:45 (snpslmd) (@snpslmd-SLOG@) Vendor daemon: snpslmd
23:00:45 (snpslmd) (@snpslmd-SLOG@) Start-Date: Wed Oct 30 2019 23:00:45 CST
23:00:45 (snpslmd) (@snpslmd-SLOG@) PID: 2233
23:00:45 (snpslmd) (@snpslmd-SLOG@) VD Version: v11.12.1.2 build 152538 x64_lsb ( build 152538 (ipv6))
23:00:45 (snpslmd) (@snpslmd-SLOG@)
23:00:45 (snpslmd) (@snpslmd-SLOG@) === Startup/Restart Info ===
23:00:45 (snpslmd) (@snpslmd-SLOG@) Options file used: None
23:00:45 (snpslmd) (@snpslmd-SLOG@) Is vendor daemon a CVD: Yes
23:00:45 (snpslmd) (@snpslmd-SLOG@) Is TS accessed: No
23:00:45 (snpslmd) (@snpslmd-SLOG@) TS accessed for feature load: -NA-
23:00:45 (snpslmd) (@snpslmd-SLOG@) Number of VD restarts since LS startup: 0
23:00:45 (snpslmd) (@snpslmd-SLOG@)
23:00:45 (snpslmd) (@snpslmd-SLOG@) === Network Info ===
23:00:45 (snpslmd) (@snpslmd-SLOG@) Socket interface: IPV4
23:00:45 (snpslmd) (@snpslmd-SLOG@) Listening port: 48325
23:00:45 (snpslmd) (@snpslmd-SLOG@) Daemon select timeout (in seconds): 1
23:00:45 (snpslmd) (@snpslmd-SLOG@)
23:00:45 (snpslmd) (@snpslmd-SLOG@) === Host Info ===
23:00:45 (snpslmd) (@snpslmd-SLOG@) Host used in license file: zengyi
23:00:45 (snpslmd) (@snpslmd-SLOG@) Running on Hypervisor: VMWare
23:00:45 (snpslmd) (@snpslmd-SLOG@) LMBIND needed: No
23:00:45 (snpslmd) (@snpslmd-SLOG@) LMBIND port: -NA-
23:00:45 (snpslmd) (@snpslmd-SLOG@) ===============================================
运行DV的时候提示 design_vision: command not found
求大佬帮忙，看下我的license配置是哪里出了问题?
command not found是你软件的PATH没设好，和lmgrd无关
看提示，你的环境变量不对，没有指定正确的path，另外，feature不全?需要修改.rc文件加入新的feature。