VCS图形界面（gui）启动问题
时间：03-15
整理：3721RD
点击：
大家好：请问我用一下命令启动VCS图形界面root@thankpad-ThinkPad-E420:/vcs# vcs –v /vcs/add4.v /vcs/addd8.v /vcs/fa.v vcs/addertb.v –debug_all –R –gui
提示如下错误：This program is proprietary and confidential information of Synopsys Inc.
and may be used and disclosed only as authorized in a license agreement
controlling such use and disclosure.
Error-[SFCOR] Source file cannot be opened
Source file "–v" cannot be opened for reading due to 'No such file or
directory'.
Please fix above issue and compile agAIn.
如果改用如下命令：oot@thankpad-ThinkPad-E420:/vcs# vcs /vcs/add4.v /vcs/addd8.v /vcs/fa.v vcs/addertb.v –debug_all –R –gui（去掉了-V）提示：Error-[SFCOR] Source file cannot be opened
Source file "/vcs/add8.v" cannot be opened for reading due to 'No such file
or directory'.
Please fix above issue and compile again.
"/vcs/add4.v", 15
但是那个路径下确实存在add8等文件啊！
有时还提示-R,-gui不存在，
最后就是如果使用dve&，dve可以成功启动！
谢谢啦！
提示如下错误：This program is proprietary and confidential information of Synopsys Inc.
and may be used and disclosed only as authorized in a license agreement
controlling such use and disclosure.
Error-[SFCOR] Source file cannot be opened
Source file "–v" cannot be opened for reading due to 'No such file or
directory'.
Please fix above issue and compile agAIn.
如果改用如下命令：oot@thankpad-ThinkPad-E420:/vcs# vcs /vcs/add4.v /vcs/addd8.v /vcs/fa.v vcs/addertb.v –debug_all –R –gui（去掉了-V）提示：Error-[SFCOR] Source file cannot be opened
Source file "/vcs/add8.v" cannot be opened for reading due to 'No such file
or directory'.
Please fix above issue and compile again.
"/vcs/add4.v", 15
但是那个路径下确实存在add8等文件啊！
有时还提示-R,-gui不存在，
最后就是如果使用dve&，dve可以成功启动！
谢谢啦！
-vis invalid
VCS还提示ERROR : Failed to execute/usr/synopsys/vcs/VMS/admin/install.sh
ERROR :
Start VMS/admin/install.sh
untar var.tar.gz...
untar samples.tar.gz ...
setting synopsys_rman.setup ...
Platform linux dependent code found
chmod: 无法访问"var": 没有那个文件或目录
谢谢你，我会尝试
小编解决了么
这个是因为打开terminal的位置和放code的位置不对应 在v文件列表.f文件里面加上./xxx/list.f,其中xxx为list列表的位置。
遇到了同样的问题，求大佬帮个忙解决下哈
求大佬分享解决方案