安装DC遇到问题

新人按照教程来安装。license生成应该是正确的，sssverify显示PASSEDIntegrity check report for license file "/eda/synopsys/license/synopsys.dat".
Report generated on 20-Jan-2016 (SCL_10.9.3)
---------------------------------------------------------
Checking the integrity of the license file....
Valid SSS feature found.
License file integrity check PASSED！
但是运行dc&，显示
[ld@localhost ~]$ dc&
[1] 16970
[ld@localhost ~]$ Fatal: Design Compiler is not enabled. (DCSH-1)
运行dv&,显示
[1] 16996
[ld@localhost ~]$
[ld@localhost ~]$ Unable to obtAIn feature 'Design-Vision ' because:
Error: Can't communicate with the license server. (SEC-12)
Please contactat ld@(none), who is
your local Synopsys license administrator for Synopsys site 000.
Unable to obtain feature 'Design-Analyzer-DAP ' because:
Error: Can't communicate with the license server. (SEC-12)
Please contactat ld@(none), who is
your local Synopsys license administrator for Synopsys site 000.
Unable to obtain feature 'Design-Analyzer ' because:
Error: Can't communicate with the license server. (SEC-12)
Please contactat ld@(none), who is
your local Synopsys license administrator for Synopsys site 000.
Fatal: At least one of the following must be enabled : Design-Vision, Design-Analyzer-DAP, Design-Analyzer. (DCSH-10)
syn_lic.log显示
(snpslmd) Licenses are case sensitive for TE_CATS
(snpslmd)
(snpslmd) EXTERNAL FILTERS are OFF
(lmgrd) snpslmd using TCP-port 32918
(snpslmd) Serving features for the following vendor names:
snpslmdCADABRAEPICISE-TCADdTE_CATSadalmdanagramarchprodavantdchrysalisdeveresthscdinnologdla_dmonledametasoftdnassdnumeritchdsaber_dmnsandworksigmacdslatsnpsOEM1snpsOEM2snpsOEM3snpsOEM4snpsOEM5snpsOEM6snpsOEM7snpsOEM8snpsOEM9ssilmdsynopsysdtmaldvcsd
(snpslmd) ------------------------------------------------------------------
(snpslmd) Checking the integrity of the license file....
(snpslmd) Valid SSS feature found.
(snpslmd) The feature is needed to enable the other keys in your license file.
(snpslmd) ------------------------------------------------------------------


.brshrc文件环境是
#synopsys
export SYNOPSYS=/eda/synopsys/dc2007
export SNPSLMD_LICENSE_FILE=66666@localhost.localdomain
export LM_LICENSE_FILE=66666@localhost.localdomain
export PATH=/eda/synopsys/dc2007/binPATH
export PATH=/eda/synopsys/scl/10.9.3/linux/binPATH
alias lmli2="lmgrd -c /eda/synopsys/license/synopsys.dat -l /eda/synopsys/syn_lic.log"
alias dc="dc_shell"
alias dv="design_vision"

DC装的是2007,2010也试过，scl用的是10.9.3

port有设正确吗?感觉根本没有向服务端申请license啊

非常感谢，添加了串口之后能打开了。

you're welcome

请问你这个问题怎么解决的? 怎么添加的串口?

请问怎么解决这个问题?先谢谢你

谢谢分享！

请问你这个问题怎么解决的? 怎么添加的串口?

:&！

！