VCS dump 出fsdb后，使用verdi开启，讯号全是NF

小弟最近在安装工作站，在测试TOOL是否正常时发现VCS dump出来的fsdb挡案一直无法被verdi所用由verdi打开后，讯号全部都会显示NF，但我在终端机下没有看到任何的错误，
并且也有指定
export LD_LIBRARY_PATH=host_name:/usr/novas/share/PLI/VCS/LINUX
输入指令为vcs -fsdb *.v
./simv
接着使用verdi开起，应该是没有错误，以下是终端机内的资讯，请各位高手帮忙找出问题，谢谢
[root@weihost ~]# cd counter/
[root@weihost counter]# vcs -fsdb *.v
Chronologic VCS (TM)
Version G-2012.09 -- Sun Mar 16 04:35:47 2014
Copyright (c) 1991-2012 by Synopsys Inc.
ALL RIGHTS RESERVED
This program is proprietary and confidential information of Synopsys Inc.
and may be used and disclosed only as authorized in a license agreement
controlling such use and disclosure.
Parsing design file 'counter.v'
Parsing design file 'tb_counter.v'
Top Level Modules:
tb_counter
TimeScale is 1 ns / 100 ps
Notice: Ports coerced to inout, use -notice for detAIls
Starting vcs inline pass...
2 modules and 0 UDP read.
recompiling module master_slave_jk
recompiling module tb_counter
Both modules done.
if [ -x ../simv ]; then chmod -x ../simv; fi
g++-o ../simv -melf_i386-Wl,-whole-archive-Wl,-no-whole-archive_vcsobj_1_1.o5NrI_d.o 5NrIB_d.o SIM_l.ormapats_mop.o rmapats.o/usr/synopsys/G-2012.09/linux/lib/libnplex_stub.so /usr/synopsys/G-2012.09/linux/lib/libvirsim.so /usr/synopsys/G-2012.09/linux/lib/librterrorinf.so /usr/synopsys/G-2012.09/linux/lib/libsnpsmalloc.so/usr/synopsys/G-2012.09/linux/lib/libvcsnew.so /usr/synopsys/G-2012.09/linux/lib/libuclinative.so/usr/synopsys/G-2012.09/linux/lib/vcs_save_restore_new.o /usr/novas/share/PLI/VCS/LINUX/pli.a /usr/synopsys/G-2012.09/linux/lib/ctype-stubs_32.a -ldl -lm-lc -lpthread -ldl
../simv up to date
cpu time: .242 seconds to compile + .202 seconds to elab + .149 seconds to link
[root@weihost counter]# ./simv
Chronologic VCS simulator copyright 1991-2012
Contains Synopsys proprietary information.
Compiler version G-2012.09; Runtime version G-2012.09;Mar 16 04:36 2014
*Verdi3* Loading libsscore_vcs201209.so
*Verdi3* : Enable Parallel Dumping.
FSDB Dumper for VCS, Release Verdi3_2013.07, Linux, 07/04/2013
(C) 1996 - 2013 by Synopsys, Inc.
*Verdi3* : Create FSDB file 'counter.fsdb'
*Verdi3* : Begin traversing the scopes, layer (0).
*Verdi3* : End of traversing.
$stop at time 11000 Scope: tb_counter File: tb_counter.v Line: 14
ucli%

我有试过dump vcd出来是正常的
且开启DVE仿真也正常

请注意你的verdi版本，以及vcd 导出的fsdb的版本

波形时间只有11000ps。我猜是这样的，你波形文件太小了，还在内存中没有更新到硬盘上，退出vcs再启动verdi应该就行了。

后来有成功了，谢谢

请问我导出.fsdb波形文件出现：Verdi3 canot load libsscore_vcs201103.so from following LD_LIBRARY_PATH，这是怎么回事啊?望指点！谢谢！

再看看路径设置的是否正确，或者这个变量是否有设置?
导出fsdb可能是tb为顶层，只加入下面的设计很可能出现nf

小编你的问题是怎么解决的?我也遇到了。

这个是仿真时间有点短，波形文件还没有写到硬盘上，因此verdi看不到波形的原因

Thanks for your sharing.