单片机 电子密码锁
时间：10-02
整理：3721RD
点击：
希望有高手帮忙改在程序......密码断电保护和键盘被锁还有报警 这三块的程序怎么加进去。#include<reg51.h>
#include<string.h>
#include<intrins.h>
#define uchar unsigned char
#define uint unsigned int
#define LCDIO P0
#define delay4us() _nop_();_nop_();_nop_();_nop_();
uchar buffer[6]={0};
sbit sda=P3^5;
sbit scl=P3^4;
sbit beep=P2^1;
bit flag=0,aa; //用户蹲渊义定时溢出标志位
uchar DSY_BUFFER[16]=" ";
uchar DSY_BUFFER1[16]=" ";
uchar Userpassword[6]={0};
sbit rs=P2^5;
sbit rd=P2^6;
sbit lcden=P2^7;
sbit led=P2^0;
sbit led1=P2^2;
uchar code table2[]="111111";
uchar code table[]="Your Password...";
void delayms(uint z)
{
uint x,y;
for(x=z;x>0;x--)
for(y=110;y>0;y--);
}
void delay() //短延时，两个机器周期,做总线的延时用
{;;}
void write_com(uchar com)
{
rs=0; //命令写入
rd=0;
lcden=0;
P0=com;
delayms(3);
lcden=1;
delayms(3);
lcden=0;
}
void write_date(uchar date)
{
rs=1; //数据写入
rd=0;
lcden=0;
P0=date;
delayms(3);
lcden=1;
delayms(3);
lcden=0;
}
void Display_String(uchar *p,uchar com)
{ uchar i;
write_com(com);
for(i=0;i<16;i++)
{
write_date(p);
}
}
void init_lcd()
{
lcden=0;
write_com(0x38);
write_com(0x0c);
write_com(0x06);
write_com(0x01);
write_com(0x80);
Display_String(table,0x80);
Display_String("Lock OK！ ",0xc0);
}
void start()
{
sda=1;
scl=1;
delay4us();
sda=0;
delay4us();
scl=0;
}
void stop()
{
sda=0;
scl=1;
delay4us();
sda=1;
delay4us();
scl=0;
}
void init() //初始化
{
sda=1;
delay();
scl=1;
delay();
}
void ack()
{
sda=0;
scl=1;
delay4us();
scl=0;
sda=1;
}
void noack()
{
sda=1;
scl=1;
delay4us();
scl=0;
sda=0;
}
uchar recbyte()
{
uchar i,rd;
rd=0x00;
sda=1;
for(i=0;i<8;i++)
{
scl=1;
rd<<=1;
rd|=sda;
delay4us();
scl=0;
delay4us();
}
scl=0;
delay4us();
return rd;
}
uchar sendbyte(uchar wd)
{
uchar i;
bit ack0;
for(i=0;i<8;i++)
{
sda=(bit)(wd&0x80);
_nop_();
_nop_();
scl=1;
delay4us();
scl=0;
wd<<=1;
}
delay4us();
sda=1;
scl=1;
delay4us();
ack0=！sda;
scl=0;
delay4us();
return ack0;
}
uchar Recstring(uchar slave,uchar subaddr,uchar *buffer,uchar n)
{
uchar i;
start();
if(！sendbyte(slave)) return 0;
if(！sendbyte(subaddr)) return 0;
start();
if(！sendbyte(slave+1)) return 0;
for(i=0;i<n-1;i++)
{
buffer=recbyte();
ack();
}
buffer[n-1]=recbyte();
noack();
stop();
return 1;
}
uchar Sendstring(uchar slave,uchar subaddr,uchar *buffer,uchar n)
{
uchar i;
start();
if(！sendbyte(slave)) return 0;
if(！sendbyte(subaddr)) return 0;
for(i=0;i<n;i++)
{
if(！sendbyte(buffer)) return 0;
}
stop();
return 1;
}
void clear_password()
{ uchar i;
for(i=0;i<6;i++)
{
Userpassword=' ';
}
for(i=0;i<16;i++)
{
DSY_BUFFER=' ';
}
}
uchar Keys_Scan()
{
uchar temp,keynum;
P1=0x0F; //键盘扫描 设定初始值 行线为低电平，列线为高电平
delayms(5);
temp=P1^0x0F;
switch(temp)
{
case 1:keynum=0;break;
case 2:keynum=1;break;
case 4:keynum=2;break;
case 8:keynum=3;break;
break;
}
P1=0xF0;
delayms(5);
temp=P1>>4^0x0F;
switch(temp)
{
case 1:keynum+=0;break;
case 2:keynum+=4;break;
case 4:keynum+=8;break;
case 8:keynum+=12;break;
break;
}
delayms(600);
return keynum;
}
void main()
{ uchar temp,i=0,j=0,k=0,n;
uchar IS_valid_user;
beep=1;
init();
init_lcd();
delayms(5);
aa=Sendstring(0xa0,1,table2,6);
delayms(5);
aa=Recstring(0xa0,1,buffer,6);
delayms(10);
P1=0x0f;
while(1)
{
if(P1！=0x0f)
{
temp=Keys_Scan();
switch(temp)
{
case 0: case 1: case 2: case 3: case 4:
case 5: case 6: case 7: case 8: case 9:
if (i<=5) //密码限制在6位以内
{
Userpassword=temp;
DSY_BUFFER='*';
Display_String(DSY_BUFFER,0xc0);
i++;
}
break;
case 10: //按A键开锁
for(k=0;k<6;k++)
{
if(buffer[k]==(Userpassword[k]+48))
flag=1;
else
flag=0;
}
if (flag==1)
{ flag=0;
i=0;
led=0; //点亮LED
clear_password();
Display_String("OPEN OK！ ",0xc0);
IS_valid_user = 1;
j=0;
}
else
{
j++;
led=1; //关闭LED
clear_password();
Display_String("ERROR！Have try ",0xc0);
write_com(0xcf);
write_date(0x30+j);
IS_valid_user=0;
}
i=0;
break;
case 11: //按B键上锁
led=1;
clear_password();
Display_String(table,0x80);
Display_String("Lock OK！ ",0xc0);
i=0;
IS_valid_user=0;
break;
case 12: //按C键设置新密码
//如果是合法用户则提示输入新密码
if ( ！IS_valid_user)
{
i=0;
Display_String("No rights ！ ",0xc0);
delayms(1000);
Display_String("Your Password...",0x80);
Display_String("Lock OK！ ",0xc0);
}
else
{
i=0;
Display_String("New Password: ",0x80);
Display_String(" ",0xc0);
}
break;
case 13: //按D键保存新密码
if ( ！IS_valid_user)
{ i=0;
Display_String("No rights ！ ",0xc0);
delayms(1000);
Display_String("Your Password...",0x80);
Display_String("Lock OK！ ",0xc0);
}
else
{i = 0;
init();
delayms(5);
for(k=0;k<6;k++)
{
Userpassword[k]=Userpassword[k]+48;
}
aa=Sendstring(0xa0,1,Userpassword,6);
delayms(5);
aa=Recstring(0xa0,1,buffer,6);
delayms(5);
clear_password();
Display_String(table,0x00);
Display_String("Password Saved！ ",0xc0);
delayms(1000);
Display_String("Do lock agian ? ",0xc0);
}
break;
case 14: //按E键消除所有输入
i=0;
clear_password();
Display_String(" ",0xc0);
break;
case 15: //清除一位
if(i！=0)i--;
for(n=0;n<i;n++)
{
DSY_BUFFER1[n]='*';
}
Display_String(DSY_BUFFER1,0xc0);
}
P1=0x0f;
}
if(j==3) //密码输入三次错误
{ Display_String("THIEF！THIEF！",0xc0);
j=0;
beep=0; //报警喇叭响
led1=0; //报警灯亮
}
}
}
#include<string.h>
#include<intrins.h>
#define uchar unsigned char
#define uint unsigned int
#define LCDIO P0
#define delay4us() _nop_();_nop_();_nop_();_nop_();
uchar buffer[6]={0};
sbit sda=P3^5;
sbit scl=P3^4;
sbit beep=P2^1;
bit flag=0,aa; //用户蹲渊义定时溢出标志位
uchar DSY_BUFFER[16]=" ";
uchar DSY_BUFFER1[16]=" ";
uchar Userpassword[6]={0};
sbit rs=P2^5;
sbit rd=P2^6;
sbit lcden=P2^7;
sbit led=P2^0;
sbit led1=P2^2;
uchar code table2[]="111111";
uchar code table[]="Your Password...";
void delayms(uint z)
{
uint x,y;
for(x=z;x>0;x--)
for(y=110;y>0;y--);
}
void delay() //短延时，两个机器周期,做总线的延时用
{;;}
void write_com(uchar com)
{
rs=0; //命令写入
rd=0;
lcden=0;
P0=com;
delayms(3);
lcden=1;
delayms(3);
lcden=0;
}
void write_date(uchar date)
{
rs=1; //数据写入
rd=0;
lcden=0;
P0=date;
delayms(3);
lcden=1;
delayms(3);
lcden=0;
}
void Display_String(uchar *p,uchar com)
{ uchar i;
write_com(com);
for(i=0;i<16;i++)
{
write_date(p);
}
}
void init_lcd()
{
lcden=0;
write_com(0x38);
write_com(0x0c);
write_com(0x06);
write_com(0x01);
write_com(0x80);
Display_String(table,0x80);
Display_String("Lock OK！ ",0xc0);
}
void start()
{
sda=1;
scl=1;
delay4us();
sda=0;
delay4us();
scl=0;
}
void stop()
{
sda=0;
scl=1;
delay4us();
sda=1;
delay4us();
scl=0;
}
void init() //初始化
{
sda=1;
delay();
scl=1;
delay();
}
void ack()
{
sda=0;
scl=1;
delay4us();
scl=0;
sda=1;
}
void noack()
{
sda=1;
scl=1;
delay4us();
scl=0;
sda=0;
}
uchar recbyte()
{
uchar i,rd;
rd=0x00;
sda=1;
for(i=0;i<8;i++)
{
scl=1;
rd<<=1;
rd|=sda;
delay4us();
scl=0;
delay4us();
}
scl=0;
delay4us();
return rd;
}
uchar sendbyte(uchar wd)
{
uchar i;
bit ack0;
for(i=0;i<8;i++)
{
sda=(bit)(wd&0x80);
_nop_();
_nop_();
scl=1;
delay4us();
scl=0;
wd<<=1;
}
delay4us();
sda=1;
scl=1;
delay4us();
ack0=！sda;
scl=0;
delay4us();
return ack0;
}
uchar Recstring(uchar slave,uchar subaddr,uchar *buffer,uchar n)
{
uchar i;
start();
if(！sendbyte(slave)) return 0;
if(！sendbyte(subaddr)) return 0;
start();
if(！sendbyte(slave+1)) return 0;
for(i=0;i<n-1;i++)
{
buffer=recbyte();
ack();
}
buffer[n-1]=recbyte();
noack();
stop();
return 1;
}
uchar Sendstring(uchar slave,uchar subaddr,uchar *buffer,uchar n)
{
uchar i;
start();
if(！sendbyte(slave)) return 0;
if(！sendbyte(subaddr)) return 0;
for(i=0;i<n;i++)
{
if(！sendbyte(buffer)) return 0;
}
stop();
return 1;
}
void clear_password()
{ uchar i;
for(i=0;i<6;i++)
{
Userpassword=' ';
}
for(i=0;i<16;i++)
{
DSY_BUFFER=' ';
}
}
uchar Keys_Scan()
{
uchar temp,keynum;
P1=0x0F; //键盘扫描 设定初始值 行线为低电平，列线为高电平
delayms(5);
temp=P1^0x0F;
switch(temp)
{
case 1:keynum=0;break;
case 2:keynum=1;break;
case 4:keynum=2;break;
case 8:keynum=3;break;
break;
}
P1=0xF0;
delayms(5);
temp=P1>>4^0x0F;
switch(temp)
{
case 1:keynum+=0;break;
case 2:keynum+=4;break;
case 4:keynum+=8;break;
case 8:keynum+=12;break;
break;
}
delayms(600);
return keynum;
}
void main()
{ uchar temp,i=0,j=0,k=0,n;
uchar IS_valid_user;
beep=1;
init();
init_lcd();
delayms(5);
aa=Sendstring(0xa0,1,table2,6);
delayms(5);
aa=Recstring(0xa0,1,buffer,6);
delayms(10);
P1=0x0f;
while(1)
{
if(P1！=0x0f)
{
temp=Keys_Scan();
switch(temp)
{
case 0: case 1: case 2: case 3: case 4:
case 5: case 6: case 7: case 8: case 9:
if (i<=5) //密码限制在6位以内
{
Userpassword=temp;
DSY_BUFFER='*';
Display_String(DSY_BUFFER,0xc0);
i++;
}
break;
case 10: //按A键开锁
for(k=0;k<6;k++)
{
if(buffer[k]==(Userpassword[k]+48))
flag=1;
else
flag=0;
}
if (flag==1)
{ flag=0;
i=0;
led=0; //点亮LED
clear_password();
Display_String("OPEN OK！ ",0xc0);
IS_valid_user = 1;
j=0;
}
else
{
j++;
led=1; //关闭LED
clear_password();
Display_String("ERROR！Have try ",0xc0);
write_com(0xcf);
write_date(0x30+j);
IS_valid_user=0;
}
i=0;
break;
case 11: //按B键上锁
led=1;
clear_password();
Display_String(table,0x80);
Display_String("Lock OK！ ",0xc0);
i=0;
IS_valid_user=0;
break;
case 12: //按C键设置新密码
//如果是合法用户则提示输入新密码
if ( ！IS_valid_user)
{
i=0;
Display_String("No rights ！ ",0xc0);
delayms(1000);
Display_String("Your Password...",0x80);
Display_String("Lock OK！ ",0xc0);
}
else
{
i=0;
Display_String("New Password: ",0x80);
Display_String(" ",0xc0);
}
break;
case 13: //按D键保存新密码
if ( ！IS_valid_user)
{ i=0;
Display_String("No rights ！ ",0xc0);
delayms(1000);
Display_String("Your Password...",0x80);
Display_String("Lock OK！ ",0xc0);
}
else
{i = 0;
init();
delayms(5);
for(k=0;k<6;k++)
{
Userpassword[k]=Userpassword[k]+48;
}
aa=Sendstring(0xa0,1,Userpassword,6);
delayms(5);
aa=Recstring(0xa0,1,buffer,6);
delayms(5);
clear_password();
Display_String(table,0x00);
Display_String("Password Saved！ ",0xc0);
delayms(1000);
Display_String("Do lock agian ? ",0xc0);
}
break;
case 14: //按E键消除所有输入
i=0;
clear_password();
Display_String(" ",0xc0);
break;
case 15: //清除一位
if(i！=0)i--;
for(n=0;n<i;n++)
{
DSY_BUFFER1[n]='*';
}
Display_String(DSY_BUFFER1,0xc0);
}
P1=0x0f;
}
if(j==3) //密码输入三次错误
{ Display_String("THIEF！THIEF！",0xc0);
j=0;
beep=0; //报警喇叭响
led1=0; //报警灯亮
}
}
}
bdjsdjcnsdjfeirfvvxmvmfjOIF