Labview控制Tektronix MDO4034c时遇到的问题
时间：10-02
整理：3721RD
点击：
想请教一下，用PC机的LAN口连接4034c，采集其信号幅值。用VISA Resource Manager显示仪器已连接，labview编程的instrument drivers 也显示出Tektronix MDO4034c，运行labview里自带的例程就报错，错误代码如下：
-1074003951 Agilent 34401.lvlib:Initialize.vi(ERR) The ID Query failed.This may mean that you selected the wrong instrument or your instrument did not respond.you may also be using a model that is not officially supported by this driver.if you are sure that you have selected the correct instrument and it is responding,try disabling the ID Query.
看起来是初始化的问题，有人能帮帮我吗?怎么解决这个问题?我的Labview是2015。
-1074003951 Agilent 34401.lvlib:Initialize.vi(ERR) The ID Query failed.This may mean that you selected the wrong instrument or your instrument did not respond.you may also be using a model that is not officially supported by this driver.if you are sure that you have selected the correct instrument and it is responding,try disabling the ID Query.
看起来是初始化的问题，有人能帮帮我吗?怎么解决这个问题?我的Labview是2015。
英文里明显给了你解释。The ID Query failed。
意思就就是，你驱动是给型号A用的，但是你手里的仪器是非A型号的。
通俗点讲，你的仪器和你的仪器LabVIEW的VI函数不匹配。
1.先用*IDN?\n指令测试是否能够返回正确的示波器产品信息
2.如果可以返回产品信息，说明仪器程序连接通信正常；如果没有返回，检查仪器控制接口是否正常；
3.设备连接通信正常后，检查第三方驱动是否有问题，建议用该仪器的编程手册进行仪器控制。