求一个蓝牙接收的简单程序

小钢炮的一段程序

1. #include "app.h"
   
2. #include "juma_sensor.h"
   
3. /*start adv*/
   
4. 
   
5. const char *name = "BlueNRG_IOT_2";
   
6. uint8_t adv_address[6] = {0x08, 0x05, 0x04, 0x03, 0x02, 0x02};
   
7. 
   
8. static float humidity;
   
9. static float temperature;
   
10. 
    
11. static void sensor_read(void* arg);
    
12. 
    
13. void on_ready(void)
    
14. {
    
15.     uint8_t tx_power_level = 7;
    
16.     uint16_t adv_interval = 100;
    
17.     jsensor_app_set_sensor(JSENSOR_TYPE_HUMITY_TEMP);
    
18.     /*Config Adv Parameter And Ready to Adv*/
    
19.     ble_set_adv_param(name, adv_address, tx_power_level, adv_interval);
    
20.     ble_device_start_advertising();
    
21.     sensor_read(NULL);
    
22. }
    
23. 
    
24. static void sensor_read(void* arg)
    
25. {
    
26.     {
    
27.         int16_t humidity;
    
28.         int16_t temperature;
    
29.         JSensor_HUM_TEMP_Typedef tdef;
    
30. 
    
31.         tdef.humidity = &humidity;
    
32.         tdef.temperature = &temperature;
    
33. 
    
34.         if (JSENSOR_OK == jsensor_app_read_sensor(JSENSOR_TYPE_HUMITY_TEMP, (void *)&tdef)) {
    
35.             ble_device_send(0x00, 2, (uint8_t *)&temperature);
    
36.             ble_device_send(0x01, 2, (uint8_t *)&humidity);
    
37.         }
    
38.     }
    
39. }
    
40. 
    
41. 
    
42. /* Device On Message */
    
43. void ble_device_on_message(uint8_t type, uint16_t length, uint8_t* value)
    
44. {
    
45. 
    
46.     if(type == 0x00) {
    
47.         if(*value == 0x00) {
    
48.             BSP_LED_Off(LED0);
    
49.         }
    
50.         if(*value == 0x01) {
    
51.             BSP_LED_On(LED0);
    
52. 
    
53.         }
    
54.     }
    
55. 
    
56. }
    
57. /* Device on connect */
    
58. void ble_device_on_connect(void)
    
59. {
    
60. 
    
61.     tBleStatus ret = BLE_WAIT_REMOTE_ENABLE_NOTIFY;
    
62. 
    
63. }
    
64. /* Device on disconnect */
    
65. void ble_device_on_disconnect(uint8_t reason)
    
66. {
    
67.     /* Make the device connectable again. */
    
68.     Ble_conn_state = BLE_CONNECTABLE;
    
69. }

这种不都是移植现成的吗?自己写得写到猴年马月去

你是准备用什么语言写的呢

小编解决了吗?

看看