微波EDA网,见证研发工程师的成长!
首页 > 研发问答 > 测试测量 > Labview > 大神进来看一看,这个三个程式怎么写~~

大神进来看一看,这个三个程式怎么写~~

时间:10-02 整理:3721RD 点击:
ProjectsProject 3a

  • Create a VI called Project 3a.vi that has a     chart indicator, a graph indicator, and an array indicator on the front     panel. The VI should generate random numbers between 0 and 1, plot them on     the chart, put them at the end of an array, and plot the array on the     graph once all the numbers have been generated. The results should be     shown in the array indicator only after all of the points have been     generated. The user should be able to control the number of points to     generate using a numeric control on the front panel.
Project 3b

  • Create a VI called Project 3b.vi. The VI     should use two VIs to accomplish the following tasks. The first VI, called     Generator.vi, should create random numbers between 0 and 100. The     user should be able to specify how many numbers should be created. The     numbers from the first VI should be passed to a second VI, called Process.vi,     that should filter the numbers. The user should be able to specify a     maximum and a minimum value for the filtering. Any numbers greater than     the maximum or less than the minimum should be thrown away. Once the     numbers have been filtered, they should be sorted in descending order. The     results of process VI should be returned to the main VI where they are     displayed to the user on a graph.
  • Hint: The VI for Project 3a can be reused as     the generator VI if its inputs and output are wired to the connector pane.     
Project 3c

Createa VI called Project 3c.vi. The VI should have a tab pane with three tabs on itsfront panel. The first tab should be labeled Control. The second tabshould be labeled Raw Data. The third tab should be labeled Analysis.The VI should call the Project 3b VI with the number of points, min, and maxparameters specified by the user on the Control pane. The results of the VIshould be shown as an array on the Raw Data pane and as a Graph on the Analysispane.


这是第一个的,你照抄遍吧,工作比较忙抽空写的,其他的自己写咯



求大神帮忙哈~~~~~

咦,大哥们人呢?

这个不会是笔试题吧?考表格、图表控件应用,随机数组创建,还有数组筛选排序,以及VI间数据传输,最后那个前面板TAB控件的使用。都是基础啊,骚年你可以的

我不行啊,弄了几天了,一个都没整出来~~~可怜的我啊,求大神帮助

提问问题首先要把题目弄懂,全部翻译成中文再提问吧!

都是些很基础的空间应用和数组处理,看看NI自带的范例就可以做了

大神,我要拜你为湿,你在哪里工作~

半路出家,摸爬滚打的不容易~

有大神可以帮忙三个程式写一下吗?头都大了,求指点~~~

看来你对很多模块都不怎么熟悉,比较急就帮你写了



我把两VI的内容写一起了,自己去分开

循环里记得加10ms延迟,养成习惯,刚写快了忘了

第3个就是个选卡控制,把前面两个程序的显示内容放上去就行了。具体的自己去写。


太感谢大神了,我以前都没接触过这些东西,现在公司买了一些NI设备。让我自学编程,我也是醉了,如何是好~我做项目管理的呀~

论坛上有很多好资料,从基础的学起

Copyright © 2017-2020 微波EDA网 版权所有

网站地图

Top