CST STUDIO SUITE 2015 Service Pack 1已发布

General / Environment

• Improved the creation of monitors when using wavelength scheme in project templates.

• Fixed several issues with global locking of simulation projects.

EDA Import / EDA Tools

• Removed optimization settings dialog box for the Decap Tool.

• Auto-correct die orientation for single dies.

CST MICROWAVE STUDIO - General

• Fixed color map dB scaling.

• Fixed 1D plotter performance problem for pasted 1D curves.

CST MICROWAVE STUDIO - Transient Solver

• Prevent checkout of 2 frontend license during DC optimization when port mode adaptation is active.

• Triangle-based surface loss calculation takes temperature-dependent materials into account.

CST MICROWAVE STUDIO - Transient Solver (TLM Mesh)

• Output farfield and RCS probes defined using spherical coordinates as spherical vector components.

• Fixed solver failure for Cable Co-simulation models run via DC.

CST MICROWAVE STUDIO - Frequency Domain Solver (Tetrahedral Mesh)

• Fixed possible crash with variable order in some cases of changing adaptation frequency.

• A single multipin port pin on two symmetry planes led to an error message.

• Field source excitation with curved mesh was inaccurate in some cases.

• Rotated field sources are now correctly considered.

• Fixed possible problems with adaptation and PML open boundaries (with fast ROM sweep).

• Fixed wrong field results, which occurred in some cases with fast ROM sweep.

CST MICROWAVE STUDIO - Integral Equation Solver

• Added check for empty excitation list to prevent undefined behavior.

• Fixed radiated power calculation for simulations with nearfield source excitations.

• Fixed problems when thin wires touch infinite ground plane.

• Fixed error in simulation setup when nearfield source touches PEC like sheet.

CST EM STUDIO - M-Static Solver

• Prevent and warn if the computation of the inductances is applied to current wires.

• Fixed the extraction of state for zero excitations.

• Fixed possible heap overflow for open-boundaries.

CST EM STUDIO - LF Time Domain Solver

• Fixed long assembly times in combination with motion and several other enhancements in 2D solver.

• Repaired the inductance computation for voltage-driven coils.

• Explicitly warn if iron losses are computed on conductive domains.

• Fixed the stacked material model.

• Fixed some mesh-related problems for some settings in the user interface.

CST EM STUDIO - LF Frequency Domain Solver

• Fixed the error with temperature-dependent materials in SAM sequence context.

CST PARTICLE STUDIO Solvers

• Applied a fix for the import of hexahedral based predefined fields.

CST CABLE STUDIO

• New cable types included in built-in library: CAT5, USB, HDMI. New Feature！

• Improved robustness of history list handling.

• Drain wire positioning now works when the outside insulator is modified.

• Improved the handling of existing and empty bundles regarding autobundling.

• Handling of existing bundles with route from curve, consider existing bundle names.

• Perform a complete search for sub bundle names when renaming bundle elements.

• Consider initial unit for stranded wires in the corresponding editor.

• Improved robustness of cable library handling.

CST PCB STUDIO

• Repaired wrong length-unit scaling of some PI solver input parameters.

• Stimulus column was turned inactive for some selected IBIS models.

• Voltage levels for IBIS models were wrong for some selected models.

• Pin groups & overlaps not optimized/cached and can result in long & redundant searches.

• Pin Grouping is sorting the table resulting in missing assignments.

• SI TD stimulus deactivated in case of open pin models. Solver ccd already handles this case.

• Fixed loss of current power supply pin selection when opening the corresponding dialog box for IR Drop.

• Improved the display of the 0D current/voltage views for IR Drop analysis.

• Initialization of IBIS dialog selected the wrong model resulting in unexpected simulation results.

• Deleting of net classes has been disabled.

• PI: Fixed that a vendor model that has a Touchstone file reference is treated as Spice sub-circuit model.

CST DESIGN STUDIO

• Parameter View is not activated automatically if schematic is changed.

• Fixed abnormal termination or Time Domain representation for FD tasks feature, when IFT is applied.

• Improved stability of S-Parameter task by preconditioning of Schur complement.

• Improved syntax check for excitation type of voltage/current sources in SPICE parser.

• Fixed wrong S-Parameter results for Cable Studio block with dispersive model.

• Version 14.0 of Filter Designer 2D integrated. New Feature！

Result Templates / VBA / Macros / External Data Access

• New macro to plot farfield on uv plane (Macros > Results > Farfields > Plot 3D Farfield on UV plane). New Feature！

• Fixed problem with VBA command GetIndexOfLastAddedDataItem of Table object.

  好厉害的样子。期待2015

  英文官网怎么注册啊。

  
  

  是山寨版的使用者，切勿屁股痒...
  

  Licence文件里有。如果你没有licence，我就无能为力了……。

  没必要追求新软件

  嗷嗷。明白了。谢谢

  2015还么有。
  

  改进不少啊，关注！

  用了   感觉和2014也没有多大区别  

  CST 2015上市不及1个月、立马SP1就上线，这是啥情况?话说...这几年来哪个版本不补到SP6，该说这是常态吗?
  最高甚至还到SP8
  

  如何获得临时的licence。

  没什么特别的吧?去年2014发布的时候就已经直接提供SP1了。

  在哪有啊

  可以提供一个2014版本的吗?谢谢啦

  很想下载啊

  远场prober计算效率提高，这非常不错。
  但时域最大值场显示不了，显示第一帧的。
  高分辨显示下效果改善了，
  

  谢谢，会持续关注。

  请问，license怎么解决的?

  来看看！！！！