D-CODE 编辑器

e  请问在D-CODE学习器中，头文件中的(Param->golbal)，D-CODE选项中的，explicit ; standard; station;  order1; order4; order10各表示什么意思?还请知道的朋友们帮把手！谢谢！

怎么没有一个人跟贴呀?

Global : 廣泛的定義wheel的type, 單位, 比例倍數, Dcode的命名方式,

每一行的記錄筆數, 分隔字元, 替換字元

當我們在學習wheel時,

第一步會去指定標頭: ( Params> headlines )

第二步會去指定單位: ( Params> Global)

1. Wheel type : ( Gerber , Tool )

2. Units : (inch, mm, mil) 定義單位

3. Units X : 倍率

4. Dcode numbering : Dcode 號碼起始定義

( explicit, Standard, Station, Order 1~ 4 )

5. 分隔(省略)字元

6. 替代字元

D-code號碼的起始定義方式 ( Dcode numbering ):

Explicit - the Dcode number is defined in the Aperture Table.Standard - the Dcode number is assigned in the following order:D10-19, D70-71, D20-29, D72-73, D30-69, D74-75.Station - the Dcode number is taken from the Aperture table and then converted to the standard order:D10-19, D70-71, D20-29, D72-73, D30-69, D74-75.Order1 - the Dcode numbers are assigned incrementally starting from D01.Order4 - the Dcode numbers are assigned incrementally starting from D04.Order10 - the Dcode numbers assigned incrementally starting at D10.

怎么没有人跟呢
怎么没有人跟呢
怎么没有人跟呢
怎么没有人跟呢
怎么没有人跟呢

跟上
DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD