求助：请问我这是哪里错了？我是新手，谢谢！
时间：10-02
整理：3721RD
点击：
hfss_uhf_probe (F:/学习/五大/仿真软件/)
HFSSDesign1
[warning] Warning - Boundary 'Rad1' and Boundary 'gnd_plane' overlap. (6:59 下午 九月 01, 2010)
[warning] Warning - Boundary 'Rad1' and Boundary 'gnd_plane' overlap. (7:07 下午 九月 01, 2010)
[warning] Warning - Boundary 'Rad1' and Boundary 'gnd_plane' overlap. (7:07 下午 九月 01, 2010)
[error] Simulation failed as engine or server machine on host: Local Machine reported error or failed during startup. (7:09 下午 九月 01, 2010)
HFSSDesign1
[warning] Warning - Boundary 'Rad1' and Boundary 'gnd_plane' overlap. (6:59 下午 九月 01, 2010)
[warning] Warning - Boundary 'Rad1' and Boundary 'gnd_plane' overlap. (7:07 下午 九月 01, 2010)
[warning] Warning - Boundary 'Rad1' and Boundary 'gnd_plane' overlap. (7:07 下午 九月 01, 2010)
[error] Simulation failed as engine or server machine on host: Local Machine reported error or failed during startup. (7:09 下午 九月 01, 2010)
提示很清楚哇，“Rad1”和“gnd”重叠了
做一个布尔操作就能解决吧
呵呵，边界条件重叠了。而且仿真软件的路径还是不要用中文为好。