仿真出现的错误的问题

在用protel99se画PCB原理图时运行 simulate->run时，产生了好多的错误，错误如下，不知道哪位牛人能

给出解答啊~~~~！

C1 Error: Pin order data (PINS=1:[<pins>]) not in READ ONLY field 4. Pins sorted by pin-name.
C1 Error: Part type must be entered in READ ONLY field 1: type=<part type>(<spice prefix>)
C1 Error: Netlist data must be entered in READ ONLY field 5: netlist=<netlist data>
C2 Error: Pin order data (PINS=1:[<pins>]) not in READ ONLY field 4. Pins sorted by pin-name.
C2 Error: Part type must be entered in READ ONLY field 1: type=<part type>(<spice prefix>)
C2 Error: Netlist data must be entered in READ ONLY field 5: netlist=<netlist data>
C3 Error: Pin order data (PINS=1:[<pins>]) not in READ ONLY field 4. Pins sorted by pin-name.
C3 Error: Part type must be entered in READ ONLY field 1: type=<part type>(<spice prefix>)
C3 Error: Netlist data must be entered in READ ONLY field 5: netlist=<netlist data>
C4 Error: Pin order data (PINS=1:[<pins>]) not in READ ONLY field 4. Pins sorted by pin-name.
C4 Error: Part type must be entered in READ ONLY field 1: type=<part type>(<spice prefix>)
C4 Error: Netlist data must be entered in READ ONLY field 5: netlist=<netlist data>

还有个问题：

如果这个运行成功了能够自动的SPICE仿真吗?

昏，难道没有人知道啊~~~~~~

新近才知道，

用的元件不对，应该用SIM。LIB库里面的元件才能进行SPICE仿真