更改ORCAD中的page number ？

如何更改ORCAD中的page number ?如page number 9,我要更改为page number 10

没改过

我也郁闷le 

我是个新手

我建立了好几个 NEW PAGE

但是page number 全部都是1  难道我建立的方式不对吗

page number 应该是系统默认增加吗

请高手指点

capture的自带库不好用

1.edit part

2.點2下pin 腳

你自己不会编辑阿
这种问题也来问

实在不行 annotate一下就可以拉

Page number not incrementing automatically
<！--Element not supported - Type: 8 Name: #comment-->

PROBLEM:<！--Element not supported - Type: 8 Name: #comment-->When I add a new schematic page to my design, Capture does not automatically increment the page number. How do I get it to increment the page numbering?

<！--Element not supported - Type: 8 Name: #comment-->

SOLUTION:<！--Element not supported - Type: 8 Name: #comment-->Every time a design is annotated, the page numbers are automatically updated as long as you have not enabled the Do not change page number option. Follow these steps to clear this option and update the page numbers automatically.

1. In the project manager window, select the design file (.DSN).
2. From the Tools menu, choose Annotate.
3. In the Annotate dialog box, clear the check box next to Do not change the page number.
4. Click OK.

If you selected this option to control the page numbering of your design, instead you need to manually edit the new page number following these steps:

1. From the project manager Edit menu, choose Browse Titleblocks.
2. Select all the titleblocks.
3. From the Edit menu, choose Properties to open a spreadsheet where you can update the Page Number property.

双击图纸右下角的Title Blocks，进入属性编辑，在Title Blocks的Page Number中修改需要显示的页数既可．

早期版本annotate一下可以改变page number,但后面的版本就不行了,如OrCAD16.2就不行,annotate只能title中显示的内容,如sheet 2 of 3,表面看上去好像是行了,但在作add intersheet references(在分页图纸间的端口的序号加上图纸编号)时就不行,总是提示error#8003,就是page number全部为1,解决方法中就是从title中个性改page number,你会看到白色部分的值与黄色部分的值不一样,黄色上的值:page number为2,page count为3,但白色区域page number为1,page count为1,将白色部份与黄色部分统一起来,改为你想要的东西就好了.

去的我空间看看吧,有解决方案  http://dandyhuang1983.spaces.live.com/default.aspx

8楼正解啊，人才啊，配合，找了好久不知道，高人提点一下豁然开朗，特注册进来感谢一下

路过。