请教：7627A校准CDMA RXTX时，TX读不出功率，CIDP超时问题。
时间：10-02
整理：3721RD
点击：
各位高手：
目前有一个7627A项目，CDMA和GSM是一起校准的，在校准CDMA RXTX时，TX读不出功率，blog显示：CIDP超时?单独校准CDMA又能通过，综测仪是8960.
目前有一个7627A项目，CDMA和GSM是一起校准的，在校准CDMA RXTX时，TX读不出功率，blog显示：CIDP超时?单独校准CDMA又能通过，综测仪是8960.
test log:
Measurement with ID "CTDP" did not complete. in the allowed timeout of 5860 ms. CRFCalCleanMeasurementManager_8960::Wait_For_Meas_To_Complete
二个问题：
1.手机打不出功率来
2.仪器HW和SW 版本很久也不能准确读出手机的power
Usually this kind of issue is caused by the UE didn't transmit expected Tx power which you set in test tree.
You can try to mofidy "Start PDMs" in test tree to check whether this error could be fixed. If changing "Start PDMs" still failed,
please use QRCT to turn on Tx and set the PDM value manually,then use spectrum analyzer to check whether the Tx power is OK or not.