之一：开箱爆照
不过，真的很迷你，很迷你...
唯一有点遗憾，没有HDMI，不过，有TV_OUT引脚，抽时间看看，怎么用..
上照吧
一张简单的“说明书”，OPI盒子，还有就是猪脚：OPI，看看与银行卡对比照，真的很迷你
选择烧录的是官方的镜像，debian_server_For_OrangePizero_v0_9_2.img
使用的卡是刚买的，东芝，class10，16G。
使用SDFormatter格式化tf卡。使用Win32DiskImager烧录。
烧录后，对tf卡分区进行扩容，
度*了一下，咦，找到一个gparted工具，这个工具的好处是有图形化界面，手动一拉，就可以，还可以新建新分区，非常方便。
扩容后分区如下：
这是前几天，做的准备工作，所以，OPI一到，直接插卡，接线
上电，由OTG供电，串口配置115200,8，N，1
输出串口信息如下：
U-Boot SPL 2016.09 (Oct 31 2016 - 11:49:45)
DRAM: 256 MiB
Failed to set core voltage！ Can't set CPU frequency
Trying to boot from MMC1
U-Boot 2016.09 (Oct 31 2016 - 11:49:45 +0800) Allwinner Technology
CPU: Allwinner H3 (SUN8I 1680)
Model: Xunlong Orange Pi PC
I2C: ready
DRAM: 256 MiB
MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: phy interface0
eth0: ethernet@1c30000
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
reading /boot.scr
538 bytes read in 25 ms (20.5 KiB/s)
## Executing script at 43100000
gpio: pin PA17 (gpio 17) value is 1
reading script.bin
35260 bytes read in 27 ms (1.2 MiB/s)
reading uImage
4680288 bytes read in 461 ms (9.7 MiB/s)
## Booting kernel from Legacy Image at 48000000 ...
Image Name: Linux-3.4.39
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4680224 Bytes = 4.5 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
Using machid 0x1029 from environment
Starting kernel ...
[sun8i_fixup]: From boot, get meminfo:
Start: 0x40000000
Size: 256MB
ion_carveout reserve: 160m@0 300m@0 130m@1 200m@1
ion_reserve_select: ion chipid [0x2004620！
ion_reserve_common: ion reserve: [0x46000000, 0x50000000]！
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.39 (root@curry) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #3 SMP PREEMPT Mon Nov 28 10:12:06 CST 2016
[ 0.000000] cma: CMA: reserved 160 MiB at 46000000
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c0dd9000 s11264 r8192 d13312 u32768
[ 0.000000] Kernel command line: console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 init=/sbin/init rootwait rootfstype=ext4 panic=10 consoleblank=0 enforcing=0 loglevel=7
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 256MB = 256MB total
[ 0.000000] Memory: 83308k/83308k available, 178836k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc08e70c8 (9085 kB)
[ 0.000000] .init : 0xc08e8000 - 0xc0939c00 ( 327 kB)
[ 0.000000] .data : 0xc093a000 - 0xc09b3e10 ( 488 kB)
[ 0.000000] .bss : 0xc09b45c4 - 0xc0b878f0 (1869 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] NR_IRQS:544
[ 0.000000] Architected local timer running at 24.00MHz.
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 0.002290] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
[ 0.002463] pid_max: default: 32768 minimum: 301
[ 0.003494] Mount-cache hash table entries: 512
[ 0.006042] Initializing cgroup subsys debug
[ 0.006136] Initializing cgroup subsys cpuacct
[ 0.006213] Initializing cgroup subsys freezer
[ 0.006356] CPU: Testing write buffer coherency: ok
[ 0.006529] ftrace: allocating 23921 entries in 71 pages
[ 0.080546] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.080642] [sunxi_smp_prepare_cpus] enter
[ 0.080752] Setting up static identity map for 0x4064a748 - 0x4064a7a0
[ 0.083058] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.083228] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.091137] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.100322] Brought up 4 CPUs
[ 0.100513] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
[ 0.101919] devtmpfs: initialized
[ 0.113465] wakeup src cnt is : 2.
[ 0.113714] sunxi pm init
[ 0.114714] pinctrl core: initialized pinctrl subsystem
[ 0.125127] NET: Registered protocol family 16
[ 0.126842] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[ 0.126842] script_sysfs_init success
[ 0.126842] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
[ 0.128776] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
[ 0.130743] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.130844] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.131674] script config pll_video to 297 Mhz
[ 0.131752] script config pll_de to 864 Mhz
[ 0.131858] script config pll_ve to 402 Mhz
[ 0.150682] bio: create slab <bio-0> at 0
[ 0.151184] [ARISC] :sunxi-arisc driver v1.04
[ 0.174706] [ARISC] :arisc version: [v0.1.58.3]
[ 0.264022] [ARISC] :sunxi-arisc driver v1.04 startup succeeded
[ 0.271208] SCSI subsystem initialized
[ 0.271208] usbcore: registered new interface driver usbfs
[ 0.271208] usbcore: registered new interface driver hub
[ 0.271208] usbcore: registered new device driver usb
[ 0.271208] twi_chan_cfg()340 - [twi0] has no twi_regulator.
[ 0.271208] twi_chan_cfg()340 - [twi1] has no twi_regulator.
[ 0.271208] twi_chan_cfg()340 - [twi2] has no twi_regulator.
[ 0.272114] Linux video capture interface: v2.00
[ 0.272642] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.274019] Bluetooth: Core ver 2.16
[ 0.274151] NET: Registered protocol family 31
[ 0.274218] Bluetooth: HCI device and connection manager initialized
[ 0.274293] Bluetooth: HCI socket layer initialized
[ 0.274353] Bluetooth: L2CAP socket layer initialized
[ 0.274477] Bluetooth: SCO socket layer initialized
[ 0.275105] cfg80211: Calling CRDA to update world regulatory domain
[ 0.280875] Switching to clocksource arch_sys_counter
[ 0.331599] FS-Cache: Loaded
[ 0.332247] CacheFiles: Loaded
[ 0.362429] NET: Registered protocol family 2
[ 0.363151] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.364664] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.365071] TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
[ 0.365428] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.365498] TCP: reno registered
[ 0.365554] UDP hash table entries: 128 (order: 0, 4096 bytes)
[ 0.365667] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
[ 0.366497] NET: Registered protocol family 1
[ 0.367563] RPC: Registered named UNIX socket transport module.
[ 0.367642] RPC: Registered udp transport module.
[ 0.367699] RPC: Registered tcp transport module.
[ 0.367754] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.369064] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
[ 0.369383] sunxi_reg_init enter
[ 0.371428] audit: initializing netlink socket (disabled)
[ 0.371583] type=2000 audit(0.370:1): initialized
[ 0.378737] NTFS driver 2.1.30 [Flags: R/W].
[ 0.379323] fuse init (API version 7.18)
[ 0.380610] msgmni has been set to 386
[ 0.384271] io scheduler noop registered
[ 0.384340] io scheduler deadline registered
[ 0.384641] io scheduler cfq registered (default)
[ 0.385479] [DISP]disp_module_init
[ 0.386293] cmdline,init_disp=
[ 0.386391] cmdline,disp=
[ 0.396987] [DISP] Fb_map_kernel_logo,line:989:Fb_map_kernel_logo failed！
[ 0.401710] [DISP]disp_module_init finish
[ 0.402270] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator.
[ 0.402358] sw_uart_get_devinfo()1503 - uart1 has no uart_regulator.
[ 0.402437] sw_uart_get_devinfo()1503 - uart2 has no uart_regulator.
[ 0.403586] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
[ 0.403667] sw_uart_pm()890 - uart0 clk is already enable
[ 0.403748] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
[ 0.515787] console [ttyS0] enabled
[ 1.081661] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
[ 1.120777] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
[ 1.129435] sunxi_di_init get di_by_pass err！
[ 1.146120] loop: module loaded
[ 1.149743] Get boot type cmd line fail
[ 1.155153] sunxi_spi_chan_cfg()1376 - [spi-0] has no spi_regulator.
[ 1.162358] sunxi_spi_chan_cfg()1376 - [spi-1] has no spi_regulator.
[ 1.170753] spi spi0: master is unqueued, this is deprecated
[ 1.177448] tun: Universal TUN/TAP device driver, 1.6
[ 1.183188] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.192343] PPP generic driver version 2.4.2
[ 1.197587] PPP BSD Compression module registered
[ 1.202941] PPP Deflate Compression module registered
[ 1.210575] PPP MPPE Compression module registered
[ 1.215981] NET: Registered protocol family 24
[ 1.221081] PPTP driver version 0.8.5
[ 1.225727] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.253303] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.262399] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
[ 1.272232] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
[ 1.290093] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
[ 1.298287] hub 1-0:1.0: USB hub found
[ 1.302616] hub 1-0:1.0: 1 port detected
[ 1.328103] sunxi-ehci sunxi-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.337215] sunxi-ehci sunxi-ehci.2: new USB bus registered, assigned bus number 2
[ 1.346960] sunxi-ehci sunxi-ehci.2: irq 106, io mem 0xf1c1b000
[ 1.370107] sunxi-ehci sunxi-ehci.2: USB 0.0 started, EHCI 1.00
[ 1.378197] hub 2-0:1.0: USB hub found
[ 1.382515] hub 2-0:1.0: 1 port detected
[ 1.407920] sunxi-ehci sunxi-ehci.3: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.417028] sunxi-ehci sunxi-ehci.3: new USB bus registered, assigned bus number 3
[ 1.426871] sunxi-ehci sunxi-ehci.3: irq 108, io mem 0xf1c1c000
[ 1.450110] sunxi-ehci sunxi-ehci.3: USB 0.0 started, EHCI 1.00
[ 1.458214] hub 3-0:1.0: USB hub found
[ 1.462525] hub 3-0:1.0: 1 port detected
[ 1.487950] sunxi-ehci sunxi-ehci.4: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.497049] sunxi-ehci sunxi-ehci.4: new USB bus registered, assigned bus number 4
[ 1.506863] sunxi-ehci sunxi-ehci.4: irq 110, io mem 0xf1c1d000
[ 1.530104] sunxi-ehci sunxi-ehci.4: USB 0.0 started, EHCI 1.00
[ 1.538108] hub 4-0:1.0: USB hub found
[ 1.542412] hub 4-0:1.0: 1 port detected
[ 1.547744] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.574879] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 1.583581] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 5
[ 1.592215] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
[ 1.655371] hub 5-0:1.0: USB hub found
[ 1.659631] hub 5-0:1.0: 1 port detected
[ 1.685105] sunxi-ohci sunxi-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 1.693803] sunxi-ohci sunxi-ohci.2: new USB bus registered, assigned bus number 6
[ 1.702418] sunxi-ohci sunxi-ohci.2: irq 107, io mem 0xf1c1b400
[ 1.765483] hub 6-0:1.0: USB hub found
[ 1.769745] hub 6-0:1.0: 1 port detected
[ 1.795192] sunxi-ohci sunxi-ohci.3: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 1.803892] sunxi-ohci sunxi-ohci.3: new USB bus registered, assigned bus number 7
[ 1.812516] sunxi-ohci sunxi-ohci.3: irq 109, io mem 0xf1c1c400
[ 1.875479] hub 7-0:1.0: USB hub found
[ 1.879732] hub 7-0:1.0: 1 port detected
[ 1.905146] sunxi-ohci sunxi-ohci.4: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 1.913856] sunxi-ohci sunxi-ohci.4: new USB bus registered, assigned bus number 8
[ 1.922469] sunxi-ohci sunxi-ohci.4: irq 111, io mem 0xf1c1d400
[ 1.985507] hub 8-0:1.0: USB hub found
[ 1.989758] hub 8-0:1.0: 1 port detected
[ 1.995247] Initializing USB Mass Storage driver...
[ 2.001348] usbcore: registered new interface driver usb-storage
[ 2.008172] USB Mass Storage support registered.
[ 2.013664] usbcore: registered new interface driver ums-alauda
[ 2.020530] usbcore: registered new interface driver ums-cypress
[ 2.027450] usbcore: registered new interface driver ums-datafab
[ 2.034409] usbcore: registered new interface driver ums_eneub6250
[ 2.041574] usbcore: registered new interface driver ums-freecom
[ 2.048516] usbcore: registered new interface driver ums-isd200
[ 2.055409] usbcore: registered new interface driver ums-jumpshot
[ 2.062463] usbcore: registered new interface driver ums-karma
[ 2.069171] usbcore: registered new interface driver ums-onetouch
[ 2.076274] usbcore: registered new interface driver ums-realtek
[ 2.083275] usbcore: registered new interface driver ums-sddr09
[ 2.090272] usbcore: registered new interface driver ums-sddr55
[ 2.097096] usbcore: registered new interface driver ums-usbat
[ 2.104045] usbcore: registered new interface driver usbserial
[ 2.110727] usbserial: USB Serial Driver core
[ 2.115789] usbcore: registered new interface driver option
[ 2.122200] USB Serial support registered for GSM modem (1-port)
[ 2.130624] file system registered
[ 2.138886] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 2.146755] android_usb gadget: Number of LUNs=3
[ 2.152037] lun0: LUN: removable file: (no medium)
[ 2.157565] lun1: LUN: removable file: (no medium)
[ 2.163128] lun2: LUN: removable file: (no medium)
[ 2.169518] android_usb gadget: android_usb ready
[ 2.176777] mousedev: PS/2 mouse device common for all mice
[ 2.183679] ls_fetch_sysconfig_para: type err device_used = 0.
[ 2.190489] =========script_get_err============
[ 2.196302] [RTC] WARNING: Rtc time will be wrong！
[ 2.201867] [RTC] WARNING: use *internal OSC* as clock source
[ 2.208983] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0
[ 2.216773] IR RC5(x) protocol handler initialized
[ 2.222565] tscdev_init: tsc driver is disabled
[ 2.228675] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0
[ 2.236202] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf
[ 2.247754] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0)
[ 2.255436] wdt_enable, write reg 0xf1c20cb8 val 0x00000000
[ 2.261755] timeout_to_interv, line 167
[ 2.266078] interv_to_timeout, line 189
[ 2.270445] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec
[ 2.280919] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 2.291383] [cpu_freq] ERR:get cpu extremity frequency from sysconfig failed, use max_freq
[ 2.310243] usbcore: registered new interface driver usbhid
[ 2.316499] usbhid: USB HID core driver
[ 2.321434] ashmem: initialized
[ 2.325078] logger: created 256K log 'log_main'
[ 2.330285] logger: created 256K log 'log_events'
[ 2.335666] logger: created 256K log 'log_radio'
[ 2.340988] logger: created 256K log 'log_system'
[ 2.345776] *******************Try sdio*******************
[ 2.346640] mmc0: req failed (CMD5): -110, retrying...
[ 2.347502] mmc0: req failed (CMD5): -110, retrying...
[ 2.348362] mmc0: req failed (CMD5): -110, retrying...
[ 2.349221] *******************Try sd *******************
[ 2.373945] mmc0: new high speed SDHC card at address 1234
[ 2.374434] mmcblk0: mmc0:1234 SA16G 14.4 GiB
[ 2.375867] mmcblk0: p1 p2 p3
[ 2.376861] *******************sd init ok*******************
[ 2.396579] sunxi_oops: heming add OOPS_INFO_ADDR = -20
[ 2.406895] asoc: sndcodec <-> sunxi-codec mapping ok
[ 2.417516] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
[ 2.424831] pktgen: Packet Generator for packet performance testing. Version: 2.74
[ 2.433805] u32 classifier
[ 2.436820] Actions configured
[ 2.440630] Netfilter messages via NETLINK v0.30.
[ 2.445946] nf_conntrack version 0.5.0 (3093 buckets, 12372 max)
[ 2.453097] ctnetlink v0.93: registering with nfnetlink.
[ 2.459059] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 2.466824] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 2.473678] xt_time: kernel timezone is -0000
[ 2.478710] IPv4 over IPv4 tunneling driver
[ 2.483939] gre: GRE over IPv4 demultiplexor driver
[ 2.489370] ip_gre: GRE over IPv4 tunneling driver
[ 2.495472] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.501637] arp_tables: (C) 2002 David S. Miller
[ 2.506846] TCP: cubic registered
[ 2.510586] Initializing XFRM netlink socket
[ 2.515726] NET: Registered protocol family 10
[ 2.522106] Mobile IPv6
[ 2.524871] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.531133] IPv6 over IPv4 tunneling driver
[ 2.537097] NET: Registered protocol family 17
[ 2.542114] NET: Registered protocol family 15
[ 2.547239] Bluetooth: RFCOMM TTY layer initialized
[ 2.552714] Bluetooth: RFCOMM socket layer initialized
[ 2.558430] Bluetooth: RFCOMM ver 1.11
[ 2.562621] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.568572] Bluetooth: BNEP filters: protocol multicast
[ 2.574446] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.581209] L2TP core driver, V2.0
[ 2.585008] PPPoL2TP kernel driver, V2.0
[ 2.589371] L2TP IP encapsulation support (L2TPv3)
[ 2.594813] L2TP netlink interface
[ 2.598627] L2TP ethernet pseudowire support (L2TPv3)
[ 2.604554] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 2.613114] ThumbEE CPU extension supported.
[ 2.617880] Registering SWP/SWPB emulation handler
[ 2.623247] sunxi_bootup_extend_init: bootup extend state 1
[ 2.631281] cmdline,disp=
[ 2.634678] [DISP] disp_init_tv,line:540:screen 0 do not support TV TYPE！
[ 2.642297] [DISP] bsp_disp_tv_register,line:946:'ptv is null
[ 2.650390] sunxi-rtc sunxi-rtc: setting system clock to 1970-01-01 00:00:07 UTC (7)
[ 2.659085] ths_fetch_sysconfig_para: type err device_used = 1.
[ 2.667506] CPU Budget:Register notifier
[ 2.671925] CPU Budget:register Success
[ 2.676196] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
[ 2.691168] ALSA device list:
[ 2.694480] #0: audiocodec
[ 2.697682] #1: sndhdmi
[ 4.877122] EXT4-fs (mmcblk0p2): recovery complete
[ 4.888706] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.897793] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 4.907657] devtmpfs: mounted
[ 4.911367] Freeing init memory: 324K
[ 5.300318] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 5.315480] systemd[1]: Detected architecture 'arm'.
[ 5.328722] systemd[1]: Failed to insert module 'autofs4'
[ 5.336558] systemd[1]: Set hostname to <OrangePizero>.
[ 5.601309] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 5.620280] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 5.629192] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.637773] systemd[1]: Expecting device dev-ttyS0.device...
[ 5.644561] systemd[1]: Starting Remote File Systems (Pre).
[ 5.651073] systemd[1]: Reached target Remote File Systems (Pre).
[ 5.657954] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 5.667117] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.676013] systemd[1]: Starting Paths.
[ 5.680567] systemd[1]: Reached target Paths.
[ 5.685477] systemd[1]: Starting Encrypted Volumes.
[ 5.691176] systemd[1]: Reached target Encrypted Volumes.
[ 5.697307] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.707830] systemd[1]: Starting Swap.
[ 5.712356] systemd[1]: Reached target Swap.
[ 5.717162] systemd[1]: Expecting device dev-mmcblk0p1.device...
[ 5.724102] systemd[1]: Starting Root Slice.
[ 5.729216] systemd[1]: Created slice Root Slice.
[ 5.734555] systemd[1]: Starting User and Session Slice.
[ 5.740928] systemd[1]: Created slice User and Session Slice.
[ 5.747375] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 5.755228] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.763054] systemd[1]: Starting Delayed Shutdown Socket.
[ 5.769424] systemd[1]: Listening on Delayed Shutdown Socket.
[ 5.775898] systemd[1]: Starting Journal Socket (/dev/log).
[ 5.782518] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.789178] systemd[1]: Starting udev Control Socket.
[ 5.795186] systemd[1]: Listening on udev Control Socket.
[ 5.801289] systemd[1]: Starting udev Kernel Socket.
[ 5.807158] systemd[1]: Listening on udev Kernel Socket.
[ 5.813164] systemd[1]: Starting Journal Socket.
[ 5.818676] systemd[1]: Listening on Journal Socket.
[ 5.824324] systemd[1]: Starting System Slice.
[ 5.829683] systemd[1]: Created slice System Slice.
[ 5.835266] systemd[1]: Started File System Check on Root Device.
[ 5.842120] systemd[1]: Starting system-getty.slice.
[ 5.848150] systemd[1]: Created slice system-getty.slice.
[ 5.854238] systemd[1]: Starting system-serial\x2dgetty.slice.
[ 5.861234] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 5.870452] systemd[1]: Started Set Up Additional Binary Formats.
[ 5.879819] systemd[1]: Starting Load Kernel Modules...
[ 5.950683] systemd[1]: Mounted Huge Pages File System.
[ 5.956711] systemd[1]: Starting udev Coldplug all Devices...
[ 6.080688] systemd[1]: Mounted POSIX Message Queue File System.
[ 6.087535] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 6.098112] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 6.211044] systemd[1]: Mounting Debug File System...
[ 6.290385] systemd[1]: Starting LSB: Set keymap...
[ 6.360421] systemd[1]: Starting Journal Service...
[ 6.411203] systemd[1]: Started Journal Service.
[ 6.970423] systemd-udevd[112]: starting version 215
[ 12.595195] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[ 13.947624] systemd-journald[109]: Received request to flush runtime journal from PID 1
Debian GNU/Linux 8 OrangePizero ttyS0
OrangePizero login: root
Password:
Last login: Thu Jan 1 00:00:39 UTC 1970 on ttyS0
Linux OrangePizero 3.4.39 #3 SMP PREEMPT Mon Nov 28 10:12:06 CST 2016 armv7l
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
***********************************************
WARNING: TO RESIZE FILESYSTEM RUN:
sudo fs_resize or sudo /usr/local/bin/fs_resize
to remove this message run:
sudo rm /usr/local/bin/fs_resize_warning
***********************************************
启动后，需要输入用户名，密码，root，orangepi，回车，OPI，跑起来吧...
